The standard EN 15193-1:2007 'Energy performance of buildings-Energy requirements for lighting' was deeply revised in 2017. The new version introduced a more detailed method to calculate the daylight supply in a space and the consequent energy demand for lighting also considering a wider number of daylight responsive automated lighting controls (stepped and dimmed). This paper quantifies the potential energy savings due to the four typologies of dimmed controls included in the standards, with respect to a manual on/off switch. The savings were calculated for a typical office room with different daylight factors, located in four cities across Europe. For each site and for each lighting control, the minimum daylight factor able to guarantee minimum savings of 20% or of 30% was highlighted, and some combinations of room variables (window size and visible transmittance, obstruction angles, etc) yielding such daylight factor values were presented.
The Energy Performance for Lighting in Buildings According to the New en 15193-1: Potential Energy Saving due to Different Photodimming Controls / Lo Verso, V. R. M.; Pellegrino, A.; Aghemo, C.. - ELETTRONICO. - (2018), pp. 1-6. ((Intervento presentato al convegno 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2018 tenutosi a Campus of the University of Palermo, Complesso Didattico, Building 19, ita nel 2018.
Titolo: | The Energy Performance for Lighting in Buildings According to the New en 15193-1: Potential Energy Saving due to Different Photodimming Controls |
Autori: | |
Data di pubblicazione: | 2018 |
Abstract: | The standard EN 15193-1:2007 'Energy performance of buildings-Energy requirements for lighting' w...as deeply revised in 2017. The new version introduced a more detailed method to calculate the daylight supply in a space and the consequent energy demand for lighting also considering a wider number of daylight responsive automated lighting controls (stepped and dimmed). This paper quantifies the potential energy savings due to the four typologies of dimmed controls included in the standards, with respect to a manual on/off switch. The savings were calculated for a typical office room with different daylight factors, located in four cities across Europe. For each site and for each lighting control, the minimum daylight factor able to guarantee minimum savings of 20% or of 30% was highlighted, and some combinations of room variables (window size and visible transmittance, obstruction angles, etc) yielding such daylight factor values were presented. |
ISBN: | 978-1-5386-5186-5 |
Appare nelle tipologie: | 4.1 Contributo in Atti di convegno |
File in questo prodotto:
File | Descrizione | Tipologia | Licenza | |
---|---|---|---|---|
313_LoVersoEtAl.pdf | Articolo principale | 2a Post-print versione editoriale / Version of Record | Non Pubblico - Accesso privato/ristretto | Administrator Richiedi una copia |
http://hdl.handle.net/11583/2785582