Archivio Istituzionale della Ricercan this paper, an innovative 18% Mn austenitic TWIP steel, which exhibits a very good combination of strength and ductility, was joined by laser arc hybrid welding to a conventional DP steel, which consists of ferrite and martensite obtained by an inter-critical heat treatment and fast cooling. An austenitic filler wire was used to improve the weld strength by avoiding the formation of Mn segregations and improper microstructures in the fusion zone by Mn dilution. Metallographic examinations, microhardness and tensile tests were carried out to assess the effects of the laser and materials interaction on the weldability of TWIP-DP dissimilar welds. Hybrid welding and austenitic filler can have a positive effect on the weldability of the DP-TWIP dissimilar joint.
Weldability of TWIP and DP steel dissimilar joint by laser arc hybrid welding with austenitic filler / Angelastro, A.; Casalino, G.; Perulli, P.; Spena, P. R.; RUSSO SPENA, Pasquale. - 67:(2018), pp. 607-611. (Intervento presentato al convegno 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2017 tenutosi a Gulf of Naples, ita nel 2017) [10.1016/j.procir.2018.05.001].
Weldability of TWIP and DP steel dissimilar joint by laser arc hybrid welding with austenitic filler
Casalino G.;RUSSO SPENA, PASQUALE
2018
Abstract
n this paper, an innovative 18% Mn austenitic TWIP steel, which exhibits a very good combination of strength and ductility, was joined by laser arc hybrid welding to a conventional DP steel, which consists of ferrite and martensite obtained by an inter-critical heat treatment and fast cooling. An austenitic filler wire was used to improve the weld strength by avoiding the formation of Mn segregations and improper microstructures in the fusion zone by Mn dilution. Metallographic examinations, microhardness and tensile tests were carried out to assess the effects of the laser and materials interaction on the weldability of TWIP-DP dissimilar welds. Hybrid welding and austenitic filler can have a positive effect on the weldability of the DP-TWIP dissimilar joint.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2779284
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo