Archivio Istituzionale della RicercaLow-cost carbons derived from recycled materials have been gaining attention recently for their potentials as filler in composites and in other applications. Biochar is one such carbon produced from the pyrolysis of biomasses or other biogenic wastes. In this work, biochar and activaed biochar were used as filler (20 wt%) to produce Epoxy resin-based composites. The activated biochar (12.5 wt%) was also used to produce screen printed thin films. Electrical characteristics of both composites and thin films were investigated.
Biochar-Polymer composites and thin films: characterizations and applications / Quaranta, S.; Savi, Patrizia; Giorcelli, Mauro; Khan, AAMER ABBAS; Tagliaferro, Alberto; Jia, C. Q.. - ELETTRONICO. - (2016), pp. 1-4. (Intervento presentato al convegno IEEE 2nd International Forum on Research and Technologies for Society and Industry (RTSI) tenutosi a Bologna, Italy nel September 7-9, 2016) [10.1109/RTSI.2016.7740554].
Biochar-Polymer composites and thin films: characterizations and applications
SAVI, Patrizia;GIORCELLI, MAURO;KHAN, AAMER ABBAS;TAGLIAFERRO, Alberto;
2016
Abstract
Low-cost carbons derived from recycled materials have been gaining attention recently for their potentials as filler in composites and in other applications. Biochar is one such carbon produced from the pyrolysis of biomasses or other biogenic wastes. In this work, biochar and activaed biochar were used as filler (20 wt%) to produce Epoxy resin-based composites. The activated biochar (12.5 wt%) was also used to produce screen printed thin films. Electrical characteristics of both composites and thin films were investigated.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2655088
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo