In this paper the performances (in terms of accuracy) of an hybrid positioning technique, that brings together an image based recognition approach and MEMS (Micro Electro-Mechanical Systems) technology, will be investigated. The image recognition based (IRB) positioning has already been well investigated in the past and represents a good technology for navigation in GNSS denied environment, like indoor or urban canyon, where GNSS accuracy is poor (tens of meters accuracy). However, for practical exploitation of IRB positioning with smartphones the following main problems must be taken into account. The first one is the optimization of the battery, that implies a proper use of the frame rate. A second main issue is represented by latencies due to image processing algorithms and visual search solutions that may require a cloud architecture to manage the size of the database. To overcome the above problems in IRB, reduction of the frame rate and latencies compensation, inertial platform built with MEMS technology may be exploited. Two different approaches are taken into account for IRB positioning: the first one is represented by a real-time solution obtainable through single images; the second one is achieved from a commercial software that locates all the frames (not suitable for real time applications). The paper presents a methodology that fuses IRB with MEMS measurements. Results have shown that with single IRB fixes fused together with inertial navigation the standard errors with the 95th percentile are about 1.66 m, 2.36 m and 3.16 m if the interval between two IRB localizations are 1, 2 and 5 sec respectively, while these errors decrease up to 0.64 m, 1.79 m and 2.05 m if the commercial hybrid absolute and relative orientation solution is considered. We can affirm that the weakness in single photograms positioning approach resides in poor orientation estimation of photograms that can grow up to some tens of degrees when poor geometry is picked in the camera scene. With this study we have demonstrate that the hybrid IRB positioning technique coupled with an INS instrument is useful for indoor navigation because errors are less than 2 m and 1 m, with intervals of about 2 s and 1 s between two images, respectively.

Inertial Sensors Strapdown Approach for Hybrid Cameras and MEMS Positioning / Dabove, Paolo; Aicardi, Irene; Grasso, Nives; Lingua, Andrea Maria; Ghinamo, Giorgio; Corbi, Cecilia. - ELETTRONICO. - (2016), pp. 994-1000. (Intervento presentato al convegno 2016 IEEE/ION Position, Location and Navigation Symposium, PLANS 2016 tenutosi a Savannah (USA) nel April 11-14, 2016) [10.1109/PLANS.2016.7479800].

Inertial Sensors Strapdown Approach for Hybrid Cameras and MEMS Positioning

DABOVE, PAOLO;AICARDI, IRENE;GRASSO, NIVES;LINGUA, Andrea Maria;
2016

Abstract

In this paper the performances (in terms of accuracy) of an hybrid positioning technique, that brings together an image based recognition approach and MEMS (Micro Electro-Mechanical Systems) technology, will be investigated. The image recognition based (IRB) positioning has already been well investigated in the past and represents a good technology for navigation in GNSS denied environment, like indoor or urban canyon, where GNSS accuracy is poor (tens of meters accuracy). However, for practical exploitation of IRB positioning with smartphones the following main problems must be taken into account. The first one is the optimization of the battery, that implies a proper use of the frame rate. A second main issue is represented by latencies due to image processing algorithms and visual search solutions that may require a cloud architecture to manage the size of the database. To overcome the above problems in IRB, reduction of the frame rate and latencies compensation, inertial platform built with MEMS technology may be exploited. Two different approaches are taken into account for IRB positioning: the first one is represented by a real-time solution obtainable through single images; the second one is achieved from a commercial software that locates all the frames (not suitable for real time applications). The paper presents a methodology that fuses IRB with MEMS measurements. Results have shown that with single IRB fixes fused together with inertial navigation the standard errors with the 95th percentile are about 1.66 m, 2.36 m and 3.16 m if the interval between two IRB localizations are 1, 2 and 5 sec respectively, while these errors decrease up to 0.64 m, 1.79 m and 2.05 m if the commercial hybrid absolute and relative orientation solution is considered. We can affirm that the weakness in single photograms positioning approach resides in poor orientation estimation of photograms that can grow up to some tens of degrees when poor geometry is picked in the camera scene. With this study we have demonstrate that the hybrid IRB positioning technique coupled with an INS instrument is useful for indoor navigation because errors are less than 2 m and 1 m, with intervals of about 2 s and 1 s between two images, respectively.
2016
978-1-5090-2042-3
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2643061
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo