Archivio Istituzionale della RicercaIn this work the experimental results of a tests campaign on Inermet® and pure Molybdenum are presented. The experimental test campaign was performed both in tension and compression in a wide range of strain-rates (between 10-3 and 103 s-1) and temperatures (between 20 and 1000 °C). The high strain-rate tests were carried out using standard Hopkinson Bar setups and the heating of the specimens was obtained with an induction coil system. The data were, finally, analyzed in order to extract the parameters of strength material models.
HIGH STRAIN-RATE AND HIGH TEMPERATURE BEHAVIOUR OF REFRACTORY SINTERED METALS / Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio. - (2015). (Intervento presentato al convegno The 21st International Symposium on Plasticity and Its Current Applications tenutosi a Montego Bay, Jamaica nel Jan. 4-9, 2015).
HIGH STRAIN-RATE AND HIGH TEMPERATURE BEHAVIOUR OF REFRACTORY SINTERED METALS
PERONI, LORENZO;SCAPIN, MARTINA;FICHERA, CLAUDIO
2015
Abstract
In this work the experimental results of a tests campaign on Inermet® and pure Molybdenum are presented. The experimental test campaign was performed both in tension and compression in a wide range of strain-rates (between 10-3 and 103 s-1) and temperatures (between 20 and 1000 °C). The high strain-rate tests were carried out using standard Hopkinson Bar setups and the heating of the specimens was obtained with an induction coil system. The data were, finally, analyzed in order to extract the parameters of strength material models.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2586560
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo