Modern embedded systems require a tight integration among sev- eral heterogeneous components including digital and analog HW, as well as HW-dependent SW. In literature there is a lack of a com- plete approach, allowing reuse and at the same time supporting cor- rect integration of heterogeneous components. Indeed, traditional approaches rely either on homogeneous top-down methodologies (that do not allow reuse) or on co-simulation (that does not guaran- tee correct integration). This paper proposes to combine IP-XACT and UNIVERCM. The former is an IEEE standard for specifying interface and communication style of digital IPs. The latter is a computational model that allows to represent the starting heteroge- neous components in a homogeneous way. In this way, IP-XACT is used in this paper to support the integration of general heteroge- neous components, to extract component interfaces and to generate the necessary connecting modules. Furthermore, UNIVERCM al- lows to generate a homogeneous representation of the components behavior (in a bottom-up flow) to allow simulation and validation of the generated components and of the final system. Thus, this strange pair allows integration and validation of system communi- cation. The effectiveness of this novel approach has been proven on complex heterogeneous benchmarks.

The Strange Pair: IP-XACT and UNIVERCM to Integrate Heterogeneous Embedded Systems / Diego, Braga; Franco, Fummi; Graziano, Pravadelli; Vinco, Sara. - (2012), pp. 76-83. (Intervento presentato al convegno IEEE International High Level Design Validation and Test Workshop (HLDVT) tenutosi a Huntington Beach, CA nel 9-10 November 2012) [10.1109/HLDVT.2012.6418246].

The Strange Pair: IP-XACT and UNIVERCM to Integrate Heterogeneous Embedded Systems

VINCO, SARA
2012

Abstract

Modern embedded systems require a tight integration among sev- eral heterogeneous components including digital and analog HW, as well as HW-dependent SW. In literature there is a lack of a com- plete approach, allowing reuse and at the same time supporting cor- rect integration of heterogeneous components. Indeed, traditional approaches rely either on homogeneous top-down methodologies (that do not allow reuse) or on co-simulation (that does not guaran- tee correct integration). This paper proposes to combine IP-XACT and UNIVERCM. The former is an IEEE standard for specifying interface and communication style of digital IPs. The latter is a computational model that allows to represent the starting heteroge- neous components in a homogeneous way. In this way, IP-XACT is used in this paper to support the integration of general heteroge- neous components, to extract component interfaces and to generate the necessary connecting modules. Furthermore, UNIVERCM al- lows to generate a homogeneous representation of the components behavior (in a bottom-up flow) to allow simulation and validation of the generated components and of the final system. Thus, this strange pair allows integration and validation of system communi- cation. The effectiveness of this novel approach has been proven on complex heterogeneous benchmarks.
2012
9781467328982
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2529505
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo