This work presents corrosion resistance results of duplex stainless steels obtained through powder metallurgy starting from austenitic X2CrNiMo17-12-2 (AISI 316L), martensitic X6Cr13 (AISI 410) powders by controlled addition of alloying elements in the right quantity to obtain the chemical composition of the structure similar to biphasic one. In the mixes preparations the Schaffler’s diagram was taken into consideration. Prepared mixes of powders have been sintered in a vacuum furnace with argon backfilling. After sintering rapid cooling was applied using nitrogen under pressure. Produced duplex stainless steels have been studied by SEM with EDS and light optical microscopy and X-rays analysis to determine obtained structures. Corrosion properties have been studied through electrochemical methods in 1M NaCl.

Corrosion behavior of vacuum sintered duplex stainless steels / L. A., Dobrzanski; Z., Brytan; ACTIS GRANDE, Marco; Rosso, Mario. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - 191 (1-3):(2007), pp. 161-164. ((Intervento presentato al convegno Advances in Materials and Processing Technologies tenutosi a Las Vegas (USA) nel July 30th - August 3rd 2006 [10.1016/j.jmatprotec.2007.03.014].

Corrosion behavior of vacuum sintered duplex stainless steels

ACTIS GRANDE, MARCO;ROSSO, MARIO
2007

Abstract

This work presents corrosion resistance results of duplex stainless steels obtained through powder metallurgy starting from austenitic X2CrNiMo17-12-2 (AISI 316L), martensitic X6Cr13 (AISI 410) powders by controlled addition of alloying elements in the right quantity to obtain the chemical composition of the structure similar to biphasic one. In the mixes preparations the Schaffler’s diagram was taken into consideration. Prepared mixes of powders have been sintered in a vacuum furnace with argon backfilling. After sintering rapid cooling was applied using nitrogen under pressure. Produced duplex stainless steels have been studied by SEM with EDS and light optical microscopy and X-rays analysis to determine obtained structures. Corrosion properties have been studied through electrochemical methods in 1M NaCl.
File in questo prodotto:
File Dimensione Formato  
JMPT_191_2007_161_164.pdf

non disponibili

Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 394.49 kB
Formato Adobe PDF
394.49 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2502020
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo