Are the new electro-hydraulic systems really advantageous in comparison with the conventional brake systems? The first part of the paper is devoted to the description of some possible configurations of an Electro-Hydraulic Brake (EHB) system, then the design and test methodology followed in the activity is presented. Through simulation it was possible to determine the main design specifications of EHB and the advantages over conventional brake systems, both from the point of view of the base brake function, anti-lock brake system function and electronic stability control function. The failsafe algorithm for the EHB system was implemented through simulation too. On the basis of the simulation results, by using, where possible, the components of conventional brake systems, a hardware-in-the loop test bench for a prototype EHB was implemented. The main simulation and experimental results are presented and discussed.

Electro hydraulic brake system: design and test through hardware in the loop simulation / D'Alfio, Nicolo'; Morgando, Andrea; Sorniotti, Aldo. - In: VEHICLE SYSTEM DYNAMICS. - ISSN 0042-3114. - STAMPA. - 44:(2006), pp. 378-392. [10.1080/00423110600872291]

Electro hydraulic brake system: design and test through hardware in the loop simulation

D'ALFIO, Nicolo';MORGANDO, ANDREA;SORNIOTTI, ALDO
2006

Abstract

Are the new electro-hydraulic systems really advantageous in comparison with the conventional brake systems? The first part of the paper is devoted to the description of some possible configurations of an Electro-Hydraulic Brake (EHB) system, then the design and test methodology followed in the activity is presented. Through simulation it was possible to determine the main design specifications of EHB and the advantages over conventional brake systems, both from the point of view of the base brake function, anti-lock brake system function and electronic stability control function. The failsafe algorithm for the EHB system was implemented through simulation too. On the basis of the simulation results, by using, where possible, the components of conventional brake systems, a hardware-in-the loop test bench for a prototype EHB was implemented. The main simulation and experimental results are presented and discussed.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/1529017
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo