PORTO @ 
Archivio Istituzionale della Ricerca
IRIS è la soluzione IT che facilita la raccolta e la gestione dei dati relativi alle attività e ai prodotti della ricerca. Fornisce a ricercatori, amministratori e valutatori gli strumenti per monitorare i risultati della ricerca, aumentarne la visibilità e allocare in modo efficace le risorse disponibili.
EnglishThe term "Rapid Tooling" refers to the rapid creation of tools in much the same way a's Solid Freeform Fabrication (SFF) means the rapid creation of models. This revolutionary approach offers both designers and manufacturers attractive advantages in the form of time compression and cost reduction. Timesaving is of vital significance in the production of EDM electrodes for the fabrication of moulds and dies. The employment of SFF and electroplating for this purpose is described. The performances of these new type of electrodes were compared with those obtained conventionally in terms of dimensional tolerances, surface roughness and working time. The surfaces of both electrodes and workpieces were also examined by SEM microscope.
Edm tooling by solid freeform fabrication and electroplating techniques / IPPOLITO R.; IULIANO L.; GATTO A.. - (1996), pp. 199-206. ((Intervento presentato al convegno Proc. of 7th Solid Freeform Fabrication Symp. Austin, Texas, USA, tenutosi a Austin (TX) nel 12-14 August.
| Titolo: | Edm tooling by solid freeform fabrication and electroplating techniques | |
| Autori: | ||
| Data di pubblicazione: | 1996 | |
| Abstract: | The term "Rapid Tooling" refers to the rapid creation of tools in much the same way a's Solid Fre...eform Fabrication (SFF) means the rapid creation of models. This revolutionary approach offers both designers and manufacturers attractive advantages in the form of time compression and cost reduction. Timesaving is of vital significance in the production of EDM electrodes for the fabrication of moulds and dies. The employment of SFF and electroplating for this purpose is described. The performances of these new type of electrodes were compared with those obtained conventionally in terms of dimensional tolerances, surface roughness and working time. The surfaces of both electrodes and workpieces were also examined by SEM microscope. | |
| Appare nelle tipologie: | 4.1 Contributo in Atti di convegno |
File in questo prodotto:
http://hdl.handle.net/11583/1415798
Copyright © 2022