This paper deals with the characterization of integrated circuits (ICs) electromagnetic emission. In particular, a critical assessment of IEC 61967-4 measurement procedure is presented. The correlation between the measurements and the emission properties of ICs is investigated. Signal degradation effects introduced by the test setup have been experimentally evaluated by exploiting an ad hoc calibration test board. Beyond a quantitative characterization of the limits of the above-mentioned measurement technique, the results shown in this paper allow the identification a new and effective way to describe electromagnetic emission of output drivers.
Analysis of a test setup for the characterization of integrated circuit electromagnetic emissions / Fiori, Franco; Pignari, S.. - 1:(2000), pp. 375-378. (Intervento presentato al convegno IEEE International Symposium on Electromagnetic Compatibility tenutosi a Washington DC (USA) nel 21-25 Aug 2000) [10.1109/ISEMC.2000.875596].
Analysis of a test setup for the characterization of integrated circuit electromagnetic emissions
FIORI, Franco;
2000
Abstract
This paper deals with the characterization of integrated circuits (ICs) electromagnetic emission. In particular, a critical assessment of IEC 61967-4 measurement procedure is presented. The correlation between the measurements and the emission properties of ICs is investigated. Signal degradation effects introduced by the test setup have been experimentally evaluated by exploiting an ad hoc calibration test board. Beyond a quantitative characterization of the limits of the above-mentioned measurement technique, the results shown in this paper allow the identification a new and effective way to describe electromagnetic emission of output drivers.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/1411571
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo