Archivio Istituzionale della RicercaMARTUCCI, ALESSANDRA
MARTUCCI, ALESSANDRA
Dipartimento Scienza Applicata e Tecnologia
045325
Mostra
records
Risultati 1 - 12 di 12 (tempo di esecuzione: 0.028 secondi).
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys
2024 Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Effect of microstructural anisotropy and heat treatment on the corrosion behaviour of additively manufactured Ti-6Al-2Sn-4Zr-6Mo alloy
2024 Martucci, A.; Iannucci, L.; Lombardi, M.; Grassini, S.
Development and characterisation of Al-based alloys processed by PBF-LB/M
2023 Martucci, Alessandra
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition
2023 Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M
2023 Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder
2023 Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M
Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review
2023 Martucci, Alessandra; Aversa, Alberta; Lombardi, Mariangela
The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion – Laser Beam process
2023 Martucci, Alessandra; Tam, Eric L.; Aversa, Alberta; Lombardi, Mariangela; Nyborg, Lars
Low-Power Laser Powder Bed Fusion Processing of Scalmalloy®
2022 Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo
Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy
2022 Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M
The Influence of Processing Parameters on the Al-Mn Enriched Nano-Precipitates Formation in a Novel Al-Mn-Cr-Zr Alloy Tailored for Power Bed Fusion-Laser Beam Process
2022 Martucci, Alessandra; Mehta, Bharat; Lombardi, Mariangela; Nyborg, Lars
An automatic on top analysis of single scan tracks to evaluate the laser powder bed fusion building parameters
2021 Martucci, A.; Marinucci, F.; Sivo, A.; Aversa, A.; Manfredi, D.; Bondioli, F.; Fino, P.; Lombardi, M.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys / Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - 14:1(2024). [10.3390/met14010017] | 1-gen-2024 | Bhaskaranand BhattAlessandra MartucciEnrico VirgillitoFederico GobberFederica BondioliDiego ManfrediMariangela LombardiPaolo Fino | metals-14-00017.pdf |
| Effect of microstructural anisotropy and heat treatment on the corrosion behaviour of additively manufactured Ti-6Al-2Sn-4Zr-6Mo alloy / Martucci, A.; Iannucci, L.; Lombardi, M.; Grassini, S.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 1008:(2024), pp. 1-9. [10.1016/j.jallcom.2024.176746] | 1-gen-2024 | Martucci A.Iannucci L.Lombardi M.Grassini S. | 1-s2.0-S0925838824033334-main.pdf |
| Development and characterisation of Al-based alloys processed by PBF-LB/M / Martucci, Alessandra. - (2023 Feb 27), pp. 1-155. | 27-feb-2023 | MARTUCCI, ALESSANDRA | conv_tesi_definitiva.pdf; conv_sintesi.pdf |
| Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition / Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - 13:7(2023). [10.3390/met13071315] | 1-gen-2023 | Alessandra MartucciEmilio BassiniMariangela Lombardi | metals-13-01315-v2.pdf |
| Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M / Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:4(2023). [10.3390/met13040796] | 1-gen-2023 | Alessandra MartucciGiulio MarcheseEmilio BassiniMariangela Lombardi | metals-13-00796+(5)_compressed.pdf |
| Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder / Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M. - In: MATERIALS RESEARCH EXPRESS. - ISSN 2053-1591. - 10:4(2023), pp. 1-18. [10.1088/2053-1591/acc82f] | 1-gen-2023 | A MartucciF GobberA AversaD ManfrediP FinoM Lombardi | Martucci_2023_Mater._Res._Express_10_046508.pdf |
| Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review / Martucci, Alessandra; Aversa, Alberta; Lombardi, Mariangela. - In: MATERIALS. - ISSN 1996-1944. - 16:3(2023), pp. 1-29. [10.3390/ma16031084] | 1-gen-2023 | Alessandra MartucciAlberta AversaMariangela Lombardi | materials-16-01084-v2 (1).pdf |
| The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion – Laser Beam process / Martucci, Alessandra; Tam, Eric L.; Aversa, Alberta; Lombardi, Mariangela; Nyborg, Lars. - In: SURFACE AND INTERFACE ANALYSIS. - ISSN 0142-2421. - ELETTRONICO. - 55:6-7(2023), pp. 388-395. [10.1002/sia.7176] | 1-gen-2023 | Alessandra MartucciAlberta AversaMariangela Lombardi + | XPS versione finale.pdf; Surface Interface Analysis - 2022 - Martucci - The effect of powder reuse on the surface chemical composition of the.pdf |
| Low-Power Laser Powder Bed Fusion Processing of Scalmalloy® / Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3123. [10.3390/ma15093123] | 1-gen-2022 | Martucci, AlessandraAversa, AlbertaManfredi, DiegoBondioli, FedericaBiamino, SaraUgues, DanieleLombardi, MariangelaFino, Paolo | materials-15-03123-v2 (1).pdf |
| Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy / Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - ELETTRONICO. - 224:(2022), p. 111396. [10.1016/j.matdes.2022.111396] | 1-gen-2022 | A MartucciA AversaF BondioliP FinoM Lombardi | 1-s2.0-S026412752201019X-main (1).pdf |
| The Influence of Processing Parameters on the Al-Mn Enriched Nano-Precipitates Formation in a Novel Al-Mn-Cr-Zr Alloy Tailored for Power Bed Fusion-Laser Beam Process / Martucci, Alessandra; Mehta, Bharat; Lombardi, Mariangela; Nyborg, Lars. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:8(2022), p. 1387. [10.3390/met12081387] | 1-gen-2022 | Alessandra MartucciMariangela Lombardi + | metals-12-01387-v2.pdf |
| An automatic on top analysis of single scan tracks to evaluate the laser powder bed fusion building parameters / Martucci, A.; Marinucci, F.; Sivo, A.; Aversa, A.; Manfredi, D.; Bondioli, F.; Fino, P.; Lombardi, M.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 14:18(2021), p. 5171. [10.3390/ma14185171] | 1-gen-2021 | Martucci A.Marinucci F.Sivo A.Aversa A.Manfredi D.Bondioli F.Fino P.Lombardi M. | 2021_Martucci_An Automatic on Top Analysis of Single Scan Tracks to Evaluate the Laser Powder Bed Fusion Building Parameters.pdf |