ARRIGO, ROSSELLA
ARRIGO, ROSSELLA
Dipartimento Scienza Applicata e Tecnologia
044771
High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure
2025 Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto
Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing
2025 Gnoffo, Chiara; Arrigo, Rossella; Frache, Alberto
Processing/microstructure relationships in melt compounded polyamide 6 with different molecular weights: Effect of screw speed and viscosity ratio
2025 Cravero, Fulvia; Arrigo, Rossella; Frache, Alberto
An Upcycling Strategy for Polyethylene Terephthalate Fibers: All-Polymer Composites with Enhanced Mechanical Properties
2024 Gnoffo, Chiara; Arrigo, Rossella; Frache, Alberto
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing
2024 Lorenzi, Eleonora; Arrigo, Rossella; Frache, Alberto
Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites
2024 Gnoffo, Chiara; Arrigo, Rossella; Sisani, Michele; Frache, Alberto
Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding: A Simulation Approach
2024 Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto
On a Biobased Epoxy Vitrimer from a Cardanol Derivative Prepared by a Simple Thiol-Epoxy “Click” Reaction
2024 Ferretti, F.; Damonte, G.; Cantamessa, F.; Arrigo, R.; Athanassiou, A.; Zych, A.; Fina, A.; Monticelli, O.
Plastic waste recycling in additive manufacturing: Recovery of polypropylene from WEEE for the production of 3D printing filaments
2024 Spirio, Andrea; Arrigo, Rossella; Frache, Alberto; Tuccinardi, Letizia; Tuffi, Riccardo
The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach
2024 Cravero, Fulvia; Cavallini, Nicola; Savorani, Francesco; Arrigo, Rossella; Frache, Alberto
Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability
2024 Bernagozzi, Giulia; Arrigo, Rossella; Ponzielli, Giuseppe; Frache, Alberto
Fully bio-based ternary polymer blends: structural characterization and mechanical behavior
2023 Arrigo, R.; D'Anna, A.; Frache, A.
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene
2023 Frache, A.; Arrigo, R.; Malucelli, G.; Camino, G.
Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes
2023 Bernagozzi, Giulia; Battegazzore, Daniele; Arrigo, Rossella; Frache, Alberto
Phenoxy resin-based vinylogous urethane covalent adaptable networks
2023 Soavi, G; Portone, F; Battegazzore, D; Paravidino, C; Arrigo, R; Pedrini, A; Pinalli, R; Fina, A; Dalcanale, E
Preparation and characterization of a fully biobased resin system for 3d‑printing, suitable for replacing fossil‑based acrylates
2023 Palucci Rosa, Raphael; Rosace, Giuseppe; Arrigo, Rossella; Malucelli, Giulio
Upcycling of PET from recycled food packaging trays via vitrimers chemistry
2023 Fabrizio, L; Arrigo, R; Scrivani, Mt; Monti, M; Fina, A
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses
2022 Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo
FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior
2022 Arrigo, Rossella; Frache, Alberto
Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers
2022 Matta, Samuele; Bartoli, Mattia; Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
High Melt Strength Recycled High-Density Polyethylene: Evaluation of a Novel Route for Targeting the Polymer Microstructure / Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 17:3(2025). [10.3390/polym17030382] | 1-gen-2025 | Bernagozzi, GiuliaArrigo, RossellaFrache, Alberto | polymers-17-00382-v2.pdf |
Mechanical recycling of HDPE-based packaging: Interplay between cross contamination, aging and reprocessing / Gnoffo, Chiara; Arrigo, Rossella; Frache, Alberto. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - 236:(2025). [10.1016/j.polymdegradstab.2025.111290] | 1-gen-2025 | Gnoffo, ChiaraArrigo, RossellaFrache, Alberto | Mechanical recycling of HDPE-based packaging interplay between cross contamination, aging and reprocessing.pdf |
Processing/microstructure relationships in melt compounded polyamide 6 with different molecular weights: Effect of screw speed and viscosity ratio / Cravero, Fulvia; Arrigo, Rossella; Frache, Alberto. - In: POLYMER ENGINEERING AND SCIENCE. - ISSN 0032-3888. - 65:5(2025), pp. 2525-2538. [10.1002/pen.27165] | 1-gen-2025 | Cravero, FulviaArrigo, RossellaFrache, Alberto | Processing-microstructure relationships in melt compounded PA6 with different molecular weights effect of screw speed and viscosity ratio.pdf |
An Upcycling Strategy for Polyethylene Terephthalate Fibers: All-Polymer Composites with Enhanced Mechanical Properties / Gnoffo, Chiara; Arrigo, Rossella; Frache, Alberto. - In: JOURNAL OF COMPOSITES SCIENCE. - ISSN 2504-477X. - 8:12(2024). [10.3390/jcs8120527] | 1-gen-2024 | Gnoffo, ChiaraArrigo, RossellaFrache, Alberto | An Upcycling Strategy for Polyethylene Terephthalate Fibers All-Polymer Composites with Enhanced Mechanical Properties.pdf |
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing / Lorenzi, Eleonora; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 16:(2024), pp. 1-15. [10.3390/polym16060858] | 1-gen-2024 | Lorenzi,EleonoraArrigo,RossellaFrache,Alberto | polymers-16-00858.pdf |
Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites / Gnoffo, Chiara; Arrigo, Rossella; Sisani, Michele; Frache, Alberto. - In: POLYMER COMPOSITES. - ISSN 0272-8397. - (2024), pp. 1-12. [10.1002/pc.28221] | 1-gen-2024 | Gnoffo, ChiaraArrigo, RossellaFrache, Alberto + | Elongational flow-induced microstructure evolutions in polypropylene-layered double hydroxides nanocomposites.pdf; PC-23-2957.R4_Proof_hi (1).pdf |
Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding: A Simulation Approach / Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 16:(2024). [10.3390/polym16010070] | 1-gen-2024 | Bernagozzi, GiuliaArrigo, RossellaFrache, Alberto | Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding A Simulation Approach.pdf |
On a Biobased Epoxy Vitrimer from a Cardanol Derivative Prepared by a Simple Thiol-Epoxy “Click” Reaction / Ferretti, F.; Damonte, G.; Cantamessa, F.; Arrigo, R.; Athanassiou, A.; Zych, A.; Fina, A.; Monticelli, O.. - In: ACS OMEGA. - ISSN 2470-1343. - 9:1(2024), pp. 1242-1250. [10.1021/acsomega.3c07459] | 1-gen-2024 | Cantamessa F.Arrigo R.Fina A. + | ferretti-et-al-2023-on-a-biobased-epoxy-vitrimer-from-a-cardanol-derivative-prepared-by-a-simple-thiol-epoxy-click.pdf |
Plastic waste recycling in additive manufacturing: Recovery of polypropylene from WEEE for the production of 3D printing filaments / Spirio, Andrea; Arrigo, Rossella; Frache, Alberto; Tuccinardi, Letizia; Tuffi, Riccardo. - In: JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING. - ISSN 2213-3437. - 12:3(2024), pp. 1-11. [10.1016/j.jece.2024.112474] | 1-gen-2024 | Arrigo, RossellaFrache, Alberto + | Plastic waste recycling in additive manufacturing recovery of polypropylene from WEEE for the production of 3D printing filaments.pdf |
The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach / Cravero, Fulvia; Cavallini, Nicola; Savorani, Francesco; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 16:7(2024). [10.3390/polym16070870] | 1-gen-2024 | Cravero, FulviaCavallini, NicolaSavorani, FrancescoArrigo, RossellaFrache, Alberto | The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends a Multivariate Approach.pdf |
Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability / Bernagozzi, Giulia; Arrigo, Rossella; Ponzielli, Giuseppe; Frache, Alberto. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - 223:(2024). [10.1016/j.polymdegradstab.2024.110714] | 1-gen-2024 | Bernagozzi, GiuliaArrigo, RossellaFrache, Alberto + | Towards effective recycling routes for polypropylene influence of a repair additive on flow characteristics and processability.pdf |
Fully bio-based ternary polymer blends: structural characterization and mechanical behavior / Arrigo, R.; D'Anna, A.; Frache, A.. - In: MATERIALS TODAY SUSTAINABILITY. - ISSN 2589-2347. - 21:(2023), p. 100314. [10.1016/j.mtsust.2022.100314] | 1-gen-2023 | Arrigo R.D'Anna A.Frache A. | 1-s2.0-S2589234722002068-main.pdf; 1-s2.0-S2589234722002068-main.pdf |
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene / Frache, A.; Arrigo, R.; Malucelli, G.; Camino, G.. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - 216:(2023). [10.1016/j.polymdegradstab.2023.110476] | 1-gen-2023 | Frache A.Arrigo R.Malucelli G.Camino G. | 1-s2.0-S0141391023002264-main.pdf; 1-s2.0-S0141391023002264-main.pdf |
Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes / Bernagozzi, Giulia; Battegazzore, Daniele; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 15:10(2023). [10.3390/polym15102263] | 1-gen-2023 | Bernagozzi, GiuliaBattegazzore, DanieleArrigo, RossellaFrache, Alberto | Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes.pdf |
Phenoxy resin-based vinylogous urethane covalent adaptable networks / Soavi, G; Portone, F; Battegazzore, D; Paravidino, C; Arrigo, R; Pedrini, A; Pinalli, R; Fina, A; Dalcanale, E. - In: REACTIVE & FUNCTIONAL POLYMERS. - ISSN 1381-5148. - STAMPA. - 191:(2023). [10.1016/j.reactfunctpolym.2023.105681] | 1-gen-2023 | Battegazzore, DParavidino, CArrigo, RFina, A + | 1-s2.0-S1381514823001840-main.pdf |
Preparation and characterization of a fully biobased resin system for 3d‑printing, suitable for replacing fossil‑based acrylates / Palucci Rosa, Raphael; Rosace, Giuseppe; Arrigo, Rossella; Malucelli, Giulio. - In: JOURNAL OF POLYMER RESEARCH. - ISSN 1022-9760. - ELETTRONICO. - 30:139(2023). [10.1007/s10965-023-03523-x] | 1-gen-2023 | Rossella ArrigoGiulio Malucelli + | Preparation and characterization of a fully biobased resin system for 3d‑printing, suitable for replacing fossil‑based acrylates.pdf |
Upcycling of PET from recycled food packaging trays via vitrimers chemistry / Fabrizio, L; Arrigo, R; Scrivani, Mt; Monti, M; Fina, A. - In: POLYMER. - ISSN 0032-3861. - 266:(2023). [10.1016/j.polymer.2022.125618] | 1-gen-2023 | Fabrizio, LArrigo, RFina, A + | 1-s2.0-S0032386122011065-main.pdf; revised clean.pdf |
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses / Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:17(2022), pp. 1-19. [10.3390/polym14173530] | 1-gen-2022 | Fontana, LucaGiubilini, AlbertoArrigo, RossellaMalucelli, GiulioMinetola, Paolo | polymers-14-03530-v3.pdf |
FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior / Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:9(2022), p. 1754. [10.3390/polym14091754] | 1-gen-2022 | Rossella ArrigoAlberto Frache | FDM Printability of PLA Based-Materials The Key Role of the Rheological Behavior.pdf |
Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers / Matta, Samuele; Bartoli, Mattia; Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio. - In: COMPOSITES. PART C, OPEN ACCESS. - ISSN 2666-6820. - ELETTRONICO. - 8:(2022), p. 100252. [10.1016/j.jcomc.2022.100252] | 1-gen-2022 | Samuele MattaMattia BartoliRossella ArrigoAlberto FracheGiulio Malucelli | Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers.pdf; pdfresizer.com-pdf-resize.pdf |