Archivio Istituzionale della RicercaPADOVANO, ELISA
PADOVANO, ELISA
Dipartimento Scienza Applicata e Tecnologia
027389
Physics-Informed Neural Networks: a step towards data-driven optimization of additive manufacturing
In corso di stampa Depaoli, Fabio; Felicioni, Stefano; Ponzio, Francesco; Aliberti, Alessandro; Macii, Enrico; Bondioli, Federica; Padovano, Elisa; DI CATALDO, Santa
A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective
2024 Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica
Enhancing Electrochemical Sensor Performance: Studies of Electrodes Tailored with ZnO/ZnFe2O4 Nanoparticles
2024 Madagalam, Mallikarjun; Bartoli, Mattia; Fernandes, Catarina; Rosito, Michele; Padovano, Elisa; Taurino, Irene; Carrara, Sandro; Tagliaferro, Alberto
Selective Laser Sintering versus Multi Jet Fusion: A Comprehensive Comparison Study Based on the Properties of Glass Beads-Reinforced Polyamide 12
2024 Lupone, F.; Padovano, E.; Lambertini, V. G.; Sampieri, R.; Casamento, F.; Zecchi, S.; Badini, C.
Unveiling the effect of Bi in ZnFe2O4 nanoparticles in electrochemical sensors
2024 Madagalam, Mallikarjun; Rosito, Michele; Blangetti, Nicola; Etzi, Marco; Padovano, Elisa; Bonelli, Barbara; Carrara, Sandro; Tagliaferro, Alberto; Bartoli, Mattia
Design and Characterization of Innovative Gas-Atomized Al-Si-Cu-Mg Alloys for Additive Manufacturing
2023 Vanzetti, Matteo; Pavel, Michael J.; Williamson, C. Jacob; Padovano, Elisa; Pérez-Andrade, Lorena I.; Weaver, Mark; Brewer, Luke N.; Bondioli, Federica; Fino, Paolo
Development of polypropylene-based composites through fused filament fabrication: The effect of carbon-based fillers
2023 Casamento, Francesco; Padovano, Elisa; Pappalardo, Stefano; Frache, Alberto; Badini, Claudio
Investigation on LPBF Processability of an In-situ A6061 Matrix Composite
2023 Rosito, Michele; Vanzetti, Matteo; Padovano, Elisa; Gili, Flavia; Dellacà, Valentina; Tedesco Michele, Maria; Bondioli, Federica; Badini, CLAUDIO FRANCESCO
Optimization of Process Parameters for CuCrZr Alloy Manufactured by Electron Beam Powder Bed Fusion Technology
2023 Felicioni, Stefano; Padovano, Elisa; Marchese, Giulio; Quercio, Michele; Canova, Aldo; Biamino, Sara; Bondioli, Federica
Processability of A6061 Aluminum Alloy Using Laser Powder Bed Fusion by In Situ Synthesis of Grain Refiners
2023 Rosito, Michele; Vanzetti, Matteo; Padovano, Elisa; Gili, Flavia; Sampieri, Roberta; Bondioli, Federica; Badini, Claudio Francesco
Unraveling the Effect of the Chemical and Structural Composition of ZnxNi1−xFe2O4 on the Electron Transfer at the Electrochemical Interface
2023 Madagalam, Mallikarjun; Bartoli, Mattia; Rosito, Michele; Blangetti, Nicola; ETZI COLLER PASCUZZI, Marco; Padovano, Elisa; Bonelli, Barbara; Carrara, Sandro; Tagliaferro, Alberto
Experimental Characterization and Modeling of 3D Printed Continuous Carbon Fibers Composites with Different Fiber Orientation Produced by FFF Process
2022 Lupone, Federico; Padovano, Elisa; Venezia, Cinzia; Badini, Claudio
Ferrite-based Nanoparticles: Synthesis, Characterization, and Non-enzymatic Electrochemical Sensing Applications.
2022 Madagalam, Mallikarjun; Rosito, Michele; Bartoli, Mattia; Padovano, Elisa; Carrara, Sandro; Tagliaferro, Alberto
Powder Bed Fusion
2022 Badini, C.; Padovano, E.
Process phenomena and material properties in selective laser sintering of polymers: A review
2022 Lupone, F.; Padovano, E.; Casamento, F.; Badini, C.
Structure-activity relationship of carbon nitride dots in inhibiting Tau aggregation
2022 Zhou, Y.; Kandel, N.; Bartoli, M.; Serafim, L. F.; Elmetwally, A. E.; Falkenberg, S. M.; Paredes, X. E.; Nelson, C. J.; Smith, N.; Padovano, E.; Zhang, W.; Mintz, K. J.; Ferreira, B. C. L. B.; Cilingir, E. K.; Chen, J.; Shah, S. K.; Prabhakar, R.; Tagliaferro, A.; Wang, C.; Leblanc, R. M.
High-Temperature Annealed Biochar as a Conductive Filler for the Production of Piezoresistive Materials for Energy Conversion Application
2021 Giorcelli, Mauro; Bartoli, Mattia; Sanginario, Alessandro; Padovano, Elisa; Rosso, Carlo; Rovere, Massimo; Tagliaferro, Alberto
Innovative approach to the development of conductive hybrid composites for Selective Laser Sintering
2021 Lupone, F.; Padovano, E.; Ostrovskaya, O.; Russo, A.; Badini, C.
Optimization of selective laser sintering process conditions using stable sintering region approach
2021 Lupone, F.; Padovano, E.; Pietroluongo, M.; Giudice, S.; Ostrovskaya, O.; Badini, C.
Optimization of Selective Laser Sintering process parameters from powder properties: polyamide 12/carbon fiber case study
2021 Lupone, Federico; Padovano, Elisa; Badini, Claudio
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Physics-Informed Neural Networks: a step towards data-driven optimization of additive manufacturing / Depaoli, Fabio; Felicioni, Stefano; Ponzio, Francesco; Aliberti, Alessandro; Macii, Enrico; Bondioli, Federica; Padovano, Elisa; DI CATALDO, Santa. - ELETTRONICO. - (In corso di stampa). (Intervento presentato al convegno IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) tenutosi a Padova (Italy) nel 10th-13th September 2024). | In corso di stampa | Fabio DepaoliStefano FelicioniFrancesco PonzioAlessandro AlibertiEnrico MaciiFederica BondioliElisa PadovanoSanta Di Cataldo | - |
| A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective / Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica. - In: METALS. - ISSN 2075-4701. - 14:8(2024). [10.3390/met14080897] | 1-gen-2024 | Thangamani, GeethapriyanFelicioni, StefanoPadovano, ElisaBiamino, SaraLombardi, MariangelaUgues, DanieleFino, PaoloBondioli, Federica | metals-14-00897-v2.pdf |
| Enhancing Electrochemical Sensor Performance: Studies of Electrodes Tailored with ZnO/ZnFe2O4 Nanoparticles / Madagalam, Mallikarjun; Bartoli, Mattia; Fernandes, Catarina; Rosito, Michele; Padovano, Elisa; Taurino, Irene; Carrara, Sandro; Tagliaferro, Alberto. - In: MEETING ABSTRACTS. - ISSN 2151-2043. - MA2024-01:(2024), pp. 2627-2627. (Intervento presentato al convegno ECS Meeting tenutosi a San Francisco, California, USA nel May 26 - 30, 2024) [10.1149/ma2024-01472627mtgabs]. | 1-gen-2024 | Madagalam, MallikarjunBartoli, MattiaRosito, MichelePadovano, ElisaTagliaferro, Alberto + | Abstract_ECS_245_submitted.pdf |
| Selective Laser Sintering versus Multi Jet Fusion: A Comprehensive Comparison Study Based on the Properties of Glass Beads-Reinforced Polyamide 12 / Lupone, F.; Padovano, E.; Lambertini, V. G.; Sampieri, R.; Casamento, F.; Zecchi, S.; Badini, C.. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1527-2648. - 26:3(2024). [10.1002/adem.202301345] | 1-gen-2024 | Lupone F.Padovano E.Casamento F.Zecchi S.Badini C. + | Adv Eng Mater - 2024 - Lupone - Selective Laser Sintering versus Multi Jet Fusion A Comprehensive Comparison Study Based.pdf |
| Unveiling the effect of Bi in ZnFe2O4 nanoparticles in electrochemical sensors / Madagalam, Mallikarjun; Rosito, Michele; Blangetti, Nicola; Etzi, Marco; Padovano, Elisa; Bonelli, Barbara; Carrara, Sandro; Tagliaferro, Alberto; Bartoli, Mattia. - In: APPLIED SURFACE SCIENCE. - ISSN 0169-4332. - 673:(2024). [10.1016/j.apsusc.2024.160870] | 1-gen-2024 | Madagalam, MallikarjunRosito, MicheleBlangetti, NicolaEtzi, MarcoPadovano, ElisaBonelli, BarbaraTagliaferro, AlbertoBartoli, Mattia + | 1-s2.0-S0169433224015836-main.pdf |
| Design and Characterization of Innovative Gas-Atomized Al-Si-Cu-Mg Alloys for Additive Manufacturing / Vanzetti, Matteo; Pavel, Michael J.; Williamson, C. Jacob; Padovano, Elisa; Pérez-Andrade, Lorena I.; Weaver, Mark; Brewer, Luke N.; Bondioli, Federica; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:11(2023), pp. 1-16. [10.3390/met13111845] | 1-gen-2023 | Vanzetti, MatteoPadovano, ElisaBondioli, FedericaFino, Paolo + | Vanzetti et al. - 2023 - Design and Characterization of Innovative Gas-Atom.pdf |
| Development of polypropylene-based composites through fused filament fabrication: The effect of carbon-based fillers / Casamento, Francesco; Padovano, Elisa; Pappalardo, Stefano; Frache, Alberto; Badini, Claudio. - In: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING. - ISSN 1359-835X. - ELETTRONICO. - 164:(2023), p. 107308. [10.1016/j.compositesa.2022.107308] | 1-gen-2023 | Casamento, FrancescoPadovano, ElisaPappalardo, StefanoFrache, AlbertoBadini, Claudio | proof articolo composites a.pdf; paper casamento.docx; 1-s2.0-S1359835X22004894-main.pdf; paper+casamento.pdf |
| Investigation on LPBF Processability of an In-situ A6061 Matrix Composite / Rosito, Michele; Vanzetti, Matteo; Padovano, Elisa; Gili, Flavia; Dellacà, Valentina; Tedesco Michele, Maria; Bondioli, Federica; Badini, CLAUDIO FRANCESCO. - ELETTRONICO. - (2023). (Intervento presentato al convegno Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 tenutosi a Lisbon (Portugal) nel 1-4 October 2023) [10.59499/EP235764682]. | 1-gen-2023 | Rosito MicheleVanzetti MatteoPadovano ElisaBondioli FedericaBadini Claudio + | 5764682.pdf |
| Optimization of Process Parameters for CuCrZr Alloy Manufactured by Electron Beam Powder Bed Fusion Technology / Felicioni, Stefano; Padovano, Elisa; Marchese, Giulio; Quercio, Michele; Canova, Aldo; Biamino, Sara; Bondioli, Federica. - STAMPA. - (2023). (Intervento presentato al convegno European Powder metallurgy congress -EUROPM 2023- tenutosi a Lisbona (PRT) nel 01-04/10/2023) [10.59499/ep235762626]. | 1-gen-2023 | Felicioni, StefanoPadovano, ElisaMarchese, GiulioQuercio, MicheleCanova, AldoBiamino, SaraBondioli, Federica | proceeding Europm.pdf |
| Processability of A6061 Aluminum Alloy Using Laser Powder Bed Fusion by In Situ Synthesis of Grain Refiners / Rosito, Michele; Vanzetti, Matteo; Padovano, Elisa; Gili, Flavia; Sampieri, Roberta; Bondioli, Federica; Badini, Claudio Francesco. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:6(2023). [10.3390/met13061128] | 1-gen-2023 | Rosito, MicheleVanzetti, MatteoPadovano, ElisaBondioli, FedericaBadini, Claudio Francesco + | metals-13-01128(1)_compressed.pdf |
| Unraveling the Effect of the Chemical and Structural Composition of ZnxNi1−xFe2O4 on the Electron Transfer at the Electrochemical Interface / Madagalam, Mallikarjun; Bartoli, Mattia; Rosito, Michele; Blangetti, Nicola; ETZI COLLER PASCUZZI, Marco; Padovano, Elisa; Bonelli, Barbara; Carrara, Sandro; Tagliaferro, Alberto. - In: SMALL STRUCTURES. - ISSN 2688-4062. - 4:12(2023). [10.1002/sstr.202300163] | 1-gen-2023 | Mallikarjun MadagalamMattia BartoliMichele RositoNicola BlangettiMarco Etzi Coller PascuzziElisa PadovanoBarbara BonelliSandro CarraraAlberto Tagliaferro | Small Structures - 2023 - Madagalam - Unraveling the Effect of the Chemical and Structural Composition of Zn x Ni1 x Fe2O4.pdf |
| Experimental Characterization and Modeling of 3D Printed Continuous Carbon Fibers Composites with Different Fiber Orientation Produced by FFF Process / Lupone, Federico; Padovano, Elisa; Venezia, Cinzia; Badini, Claudio. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:3(2022), p. 426. [10.3390/polym14030426] | 1-gen-2022 | Lupone, FedericoPadovano, ElisaBadini, Claudio + | 2022_Experimental Characterization and Modeling of 3D Printed Continuous Carbon Fibers Composites with Different Fiber Orientation Produced by FFF Process.pdf |
| Ferrite-based Nanoparticles: Synthesis, Characterization, and Non-enzymatic Electrochemical Sensing Applications / Madagalam, Mallikarjun; Rosito, Michele; Bartoli, Mattia; Padovano, Elisa; Carrara, Sandro; Tagliaferro, Alberto. - ELETTRONICO. - (2022). (Intervento presentato al convegno NanoInnovation 2022 tenutosi a Roma nel 19-23 Settembre 2022) [10.13140/RG.2.2.15124.58244]. | 1-gen-2022 | Mallikarjun MadagalamMichele RositoMattia BartoliElisa PadovanoAlberto Tagliaferro + | MADAGALAM_Mallikarjun.pdf |
| Powder Bed Fusion / Badini, C.; Padovano, E. - In: High Resolution Manufacturing from 2D to 3D/4D Printing Applications in Engineering and MedicineELETTRONICO. - [s.l] : Springer, 2022. - ISBN 978-3-031-13778-5. - pp. 81-103 [10.1007/978-3-031-13779-2_4] | 1-gen-2022 | Badini, C.Padovano, E. | Chapter 4_proof.pdf; Chapter 4 final_accepted.pdf |
| Process phenomena and material properties in selective laser sintering of polymers: A review / Lupone, F.; Padovano, E.; Casamento, F.; Badini, C.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:1(2022), p. 183. [10.3390/ma15010183] | 1-gen-2022 | Lupone F.Padovano E.Casamento F.Badini C. | 2020_Process Phenomena and Material Properties in Selective Laser Sintering.pdf |
| Structure-activity relationship of carbon nitride dots in inhibiting Tau aggregation / Zhou, Y.; Kandel, N.; Bartoli, M.; Serafim, L. F.; Elmetwally, A. E.; Falkenberg, S. M.; Paredes, X. E.; Nelson, C. J.; Smith, N.; Padovano, E.; Zhang, W.; Mintz, K. J.; Ferreira, B. C. L. B.; Cilingir, E. K.; Chen, J.; Shah, S. K.; Prabhakar, R.; Tagliaferro, A.; Wang, C.; Leblanc, R. M.. - In: CARBON. - ISSN 0008-6223. - ELETTRONICO. - 193:(2022), pp. 1-16. [10.1016/j.carbon.2022.03.021] | 1-gen-2022 | Bartoli M.Padovano E.Zhang W.Tagliaferro A. + | Carbon Group_Cdots_2.pdf |
| High-Temperature Annealed Biochar as a Conductive Filler for the Production of Piezoresistive Materials for Energy Conversion Application / Giorcelli, Mauro; Bartoli, Mattia; Sanginario, Alessandro; Padovano, Elisa; Rosso, Carlo; Rovere, Massimo; Tagliaferro, Alberto. - In: ACS APPLIED ELECTRONIC MATERIALS. - ISSN 2637-6113. - (2021). [10.1021/acsaelm.0c00971] | 1-gen-2021 | Mauro GiorcelliMattia BartoliAlessandro SanginarioElisa PadovanoCarlo RossoMassimo RovereAlberto Tagliaferro | High-Temperature Annealed Biochar as a Conductive Filler for the Production of Piezoresistive Materials for Energy Conversion Application.pdf |
| Innovative approach to the development of conductive hybrid composites for Selective Laser Sintering / Lupone, F.; Padovano, E.; Ostrovskaya, O.; Russo, A.; Badini, C.. - In: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING. - ISSN 1359-835X. - ELETTRONICO. - 147:(2021), p. 106429. [10.1016/j.compositesa.2021.106429] | 1-gen-2021 | Lupone F.Padovano E.Ostrovskaya O.Badini C. + | Compositi ibridi_CPA_rev post print.pdf; 2021_Innovative approach to the development of conductive hybrid composites for Selective Laser Sintering.pdf |
| Optimization of selective laser sintering process conditions using stable sintering region approach / Lupone, F.; Padovano, E.; Pietroluongo, M.; Giudice, S.; Ostrovskaya, O.; Badini, C.. - In: EXPRESS POLYMER LETTERS. - ISSN 1788-618X. - 15:2(2021), pp. 177-192. [10.3144/expresspolymlett.2021.16] | 1-gen-2021 | Lupone F.Padovano E.Pietroluongo M.Ostrovskaya O.Badini C. + | 2021_Optimization of selective laser sintering process conditions.pdf |
| Optimization of Selective Laser Sintering process parameters from powder properties: polyamide 12/carbon fiber case study / Lupone, Federico; Padovano, Elisa; Badini, Claudio. - ELETTRONICO. - (2021). (Intervento presentato al convegno XVI Convegno Nazionale AIMAT 2021 tenutosi a Cagliari (IT) nel 15 - 18 settembre 2021). | 1-gen-2021 | Lupone, FedericoPadovano, ElisaBadini, Claudio | abstract_AIMAT2021_Lupone.pdf |