Archivio Istituzionale della RicercaBOTTO, DANIELE
BOTTO, DANIELE
Dipartimento di Ingegneria Meccanica e Aerospaziale
002584
Analysis of nonlinear vibrations using DIC and the Smoothed Harmonics Method
2023 Occhipinti, Serena; Neri, Paolo; Firrone, Christian Maria; Botto, Daniele
AN EXPERIMENTAL INVESTIGATION ON THE DYNAMIC RESPONSE VARIABILITY OF A TURBINE BLADE WITH MID-SPAN DAMPERS
2022 Ferhatoglu, E.; Botto, D.; Zucca, S.
EXPERIMENTAL INVESTIGATION OF FRICTION DAMPING IN BLADE ROOT JOINTS
2022 Botto, D.; Iannotti, V.; Cuccovillo, F.
Comparison of contact parameters measured with two different friction rigs for nonlinear dynamic analysis
2020 Fantetti, A.; Pennisi, C.; Botto, D.; Zucca, S.; Schwingshackl, C.
FRETTING WEAR OF T800 COATING IN AERO-ENGINE APPLICATIONS
2020 Lavella, Mario; Botto, Daniele
Nonlinear dynamic analysis of gas turbine combustor leaf seal
2020 Tamatam, L. R.; Botto, D.; Zucca, S.; Funghi, F.
Nonlinear Vibration Analysis of Turbine Bladed Disks With Mid-Span Dampers
2020 Ferhatoglu, Erhan; Zucca, Stefano; Botto, Daniele; Auciello, Jury; Arcangeli, Lorenzo
Reduced-Order Modeling Friction for Line Contact in a Turbine Blade Damper System
2020 Li, Dongwu; Xu, Chao; Gola, Muzio; Botto, Daniele
A coupled approach to model the effect of wear on the dynamics of bladed disks
2019 Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano
Effect of wear on the dynamics of structures with contact interfaces by a coupled static/dynamic multi-harmonic balance method
2019 Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano
Fretting amplitude map of martensitic stainless steels
2019 Lavella, M.; Botto, D.
Wear mechanism of fretted CoMoCrSi coatings
2019 Lavella, M.; Botto, D.
Effect of variation in contact friction on the performance of the under-platform dampers
2018 Umer, M.; Botto, D.; Zucca, S.
Experimental Study of under-platform Damper Kinematics in Presence of Blade Dynamics
2018 Botto, D.; Gastaldi, C.; Gola, M. M.; Umer, M.
Reduction of the design space to optimize blade fir-tree attachments
2018 Alinejad, F.; Botto, D.; Gola, M.; Bessone, Alessandro
The effect of friction damping on the dynamic response of vibrating structures: an insight into model validation
2018 Umer, M.; Gastaldi, C.; Botto, D.
An Experimental Investigation of the Dynamic of a Blade With Two Under-Platform Dampers
2017 Botto, Daniele; Umer, Muhammad; Gastaldi, Chiara; Gola, Muzio
Innovative Design of Attachment for Turbine Blade Rotating at High Speed
2017 Botto, Daniele; Alinejad, Farhad
Characterization of contact parameters and fretting wear behavior of T-800 coating on Inconel 718
2013 Lavella, Mario; Botto, Daniele; Gola, Muzio
Dynamic Identfication of Friction Damping in the Joints of an Engine-Like Bladed-Disks
2013 Botto, Daniele; Firrone, CHRISTIAN MARIA; Paolo, Calza; Gola, Muzio
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Analysis of nonlinear vibrations using DIC and the Smoothed Harmonics Method / Occhipinti, Serena; Neri, Paolo; Firrone, Christian Maria; Botto, Daniele. - ELETTRONICO. - (2023). (Intervento presentato al convegno NODYCON 2023 tenutosi a Roma (ITA) nel 18-22/06/2023). | 1-gen-2023 | Occhipinti, SerenaNeri, PaoloFirrone, Christian MariaBotto, Daniele | - |
| AN EXPERIMENTAL INVESTIGATION ON THE DYNAMIC RESPONSE VARIABILITY OF A TURBINE BLADE WITH MID-SPAN DAMPERS / Ferhatoglu, E.; Botto, D.; Zucca, S.. - ELETTRONICO. - 8-B:(2022). (Intervento presentato al convegno ASME Turbo Expo 2022 tenutosi a Rotterdam (Netherlands) nel June 13–17, 2022) [10.1115/GT2022-79980]. | 1-gen-2022 | Ferhatoglu E.Botto D.Zucca S. | Mid-span Damper_TE2022_revised_v2.pdf |
| EXPERIMENTAL INVESTIGATION OF FRICTION DAMPING IN BLADE ROOT JOINTS / Botto, D.; Iannotti, V.; Cuccovillo, F.. - ELETTRONICO. - 8-B:(2022). (Intervento presentato al convegno ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022 tenutosi a Rotterdam (Netherlands) nel 2022) [10.1115/GT2022-81663]. | 1-gen-2022 | Botto D.Iannotti V.Cuccovillo F. | - |
| Comparison of contact parameters measured with two different friction rigs for nonlinear dynamic analysis / Fantetti, A.; Pennisi, C.; Botto, D.; Zucca, S.; Schwingshackl, C.. - (2020), pp. 2165-2174. (Intervento presentato al convegno 2020 International Conference on Noise and Vibration Engineering, ISMA 2020 and 2020 International Conference on Uncertainty in Structural Dynamics, USD 2020 tenutosi a Leuven, Belgio nel 2020). | 1-gen-2020 | Botto D.Zucca S. + | 2020 ISMA - Round Robin.pdf |
| FRETTING WEAR OF T800 COATING IN AERO-ENGINE APPLICATIONS / Lavella, Mario; Botto, Daniele. - ELETTRONICO. - 11:(2020). (Intervento presentato al convegno ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020; Virtual, Online tenutosi a Virtual Online nel September 21-25, 2020) [10.1115/GT2020-15608]. | 1-gen-2020 | Mario LavellaDaniele Botto | GT2020-15608.pdf |
| Nonlinear dynamic analysis of gas turbine combustor leaf seal / Tamatam, L. R.; Botto, D.; Zucca, S.; Funghi, F.. - ELETTRONICO. - (2020), pp. 2187-2202. (Intervento presentato al convegno 2020 International Conference on Noise and Vibration Engineering, ISMA 2020 and 2020 International Conference on Uncertainty in Structural Dynamics, USD 2020 tenutosi a Virtual nel 2020). | 1-gen-2020 | Tamatam L. R.Botto D.Zucca S. + | ISMA 2020 - Leaf Seal.pdf |
| Nonlinear Vibration Analysis of Turbine Bladed Disks With Mid-Span Dampers / Ferhatoglu, Erhan; Zucca, Stefano; Botto, Daniele; Auciello, Jury; Arcangeli, Lorenzo. - (2020). (Intervento presentato al convegno ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition tenutosi a Virtual, Online) [10.1115/gt2020-14942]. | 1-gen-2020 | Erhan FerhatogluStefano ZuccaDaniele Botto + | v011t30a020-gt2020-14942.pdf |
| Reduced-Order Modeling Friction for Line Contact in a Turbine Blade Damper System / Li, Dongwu; Xu, Chao; Gola, Muzio; Botto, Daniele. - ELETTRONICO. - 2:(2020), pp. 197-205. [10.1007/978-3-030-34747-5] | 1-gen-2020 | Gola MuzioBotto, Daniele + | NODYCON2019_paper_336_PostPrint.pdf; NODYCON.pdf |
| A coupled approach to model the effect of wear on the dynamics of bladed disks / Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano. - ELETTRONICO. - (2019), pp. 1-8. (Intervento presentato al convegno 26th International Congress on Sound and Vibration tenutosi a Montreal, Canada nel 7-11 July 2019). | 1-gen-2019 | Lakshminarayana Reddy TamatamDaniele BottoStefano Zucca | ICSV26_893_full_paper_Reddy.pdf |
| Effect of wear on the dynamics of structures with contact interfaces by a coupled static/dynamic multi-harmonic balance method / Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano. - STAMPA. - 1:(2019), pp. 137-138. (Intervento presentato al convegno First International Nonlinear Dynamics Conference NODYCON 2019 tenutosi a Rome nel 17-20 February 2019). | 1-gen-2019 | lakshminarayana reddy tamatamdaniele bottostefano zucca | - |
| Fretting amplitude map of martensitic stainless steels / Lavella, M.; Botto, D.. - ELETTRONICO. - (2019), pp. 70-71. (Intervento presentato al convegno 9th Symposium on Fretting Fatigue ISFF9 tenutosi a Seville nel April 1st - 3st, 2019). | 1-gen-2019 | M. LavellaD. Botto | FrettingAmplitudeMapOfMartensiticStainlessSteels-LIBRO-ABSTRACT-ISFF9-v5.pdf |
| Wear mechanism of fretted CoMoCrSi coatings / Lavella, M.; Botto, D.. - ELETTRONICO. - (2019), pp. 85-86. (Intervento presentato al convegno 9th Symposium on Fretting Fatigue ISFF9 tenutosi a Seville nel April 1st - 3st, 2019). | 1-gen-2019 | M. LavellaD. Botto | WearMechanismOfFrettedCoMoCrSiCoatings-LIBRO-ABSTRACT-ISFF9-v5.pdf |
| Effect of variation in contact friction on the performance of the under-platform dampers / Umer, M.; Botto, D.; Zucca, S.. - ELETTRONICO. - 4:(2018), pp. 2559-2566. (Intervento presentato al convegno 26th International Congress on Sound and Vibration, ICSV 2019 tenutosi a can nel 2019). | 1-gen-2018 | Umer M.Botto D.Zucca S. | full_paper_630.pdf |
| Experimental Study of under-platform Damper Kinematics in Presence of Blade Dynamics / Botto, D.; Gastaldi, C.; Gola, M. M.; Umer, M.. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - 302:(2018), pp. 1-7. (Intervento presentato al convegno 2017 International Conference on Aerospace Technology, Communications and Energy Systems, ATCES 2017 tenutosi a Samara University, rus nel 2017) [10.1088/1757-899X/302/1/012016]. | 1-gen-2018 | Botto, D.Gastaldi, C.Gola, M. M.Umer, M. | - |
| Reduction of the design space to optimize blade fir-tree attachments / Alinejad, F.; Botto, D.; Gola, M.; Bessone, Alessandro. - ELETTRONICO. - 7:(2018). (Intervento presentato al convegno ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018 tenutosi a nor nel 2018) [10.1115/GT201875781]. | 1-gen-2018 | Alinejad, F.Botto, D.Gola, M.BESSONE, ALESSANDRO | - |
| The effect of friction damping on the dynamic response of vibrating structures: an insight into model validation / Umer, M.; Gastaldi, C.; Botto, D.. - ELETTRONICO. - (2018), pp. 1021-1035. (Intervento presentato al convegno 28th International Conference on Noise and Vibration Engineering, ISMA 2018 and 7th International Conference on Uncertainty in Structural Dynamics, USD 2018 tenutosi a bel nel 2018). | 1-gen-2018 | Umer, M.Gastaldi, C.Botto, D. | - |
| An Experimental Investigation of the Dynamic of a Blade With Two Under-Platform Dampers / Botto, Daniele; Umer, Muhammad; Gastaldi, Chiara; Gola, Muzio. - STAMPA. - 7B: Structures and Dynamics:(2017), p. V07BT35A029. (Intervento presentato al convegno Turbo Expo: Power for Land, Sea, and Air tenutosi a Charlotte, North Carolina, USA nel 25-30 June, 2017) [10.1115/GT2017-64928]. | 1-gen-2017 | BOTTO, DANIELEUMER, MUHAMMADGASTALDI, CHIARAGOLA, Muzio | - |
| Innovative Design of Attachment for Turbine Blade Rotating at High Speed / Botto, Daniele; Alinejad, Farhad. - STAMPA. - 7A: Structures and Dynamics:(2017), p. V07AT30A007. (Intervento presentato al convegno Turbo Expo: Power for Land, Sea, and Air tenutosi a Charlotte, North Carolina, USA nel June 26–30, 2017) [10.1115/GT2017-64959]. | 1-gen-2017 | BOTTO, DANIELEALINEJAD, FARHAD | - |
| Characterization of contact parameters and fretting wear behavior of T-800 coating on Inconel 718 / Lavella, Mario; Botto, Daniele; Gola, Muzio. - (2013). (Intervento presentato al convegno WTC 2013, 5th World Tribology Congress tenutosi a Torino nel September 8 – 13, 2013). | 1-gen-2013 | LAVELLA, MARIOBOTTO, DANIELEGOLA, Muzio | - |
| Dynamic Identfication of Friction Damping in the Joints of an Engine-Like Bladed-Disks / Botto, Daniele; Firrone, CHRISTIAN MARIA; Paolo, Calza; Gola, Muzio. - ELETTRONICO. - (2013). (Intervento presentato al convegno WTC 2013, 5th World Tribology Congress tenutosi a Torino nel September 8 – 13, 2013). | 1-gen-2013 | BOTTO, DANIELEFIRRONE, CHRISTIAN MARIAGOLA, Muzio + | - |