This paper presents a novel compact PCB-to-waveguide feed element enabling dual-circular polarization for full metal direct radiating arrays operating in the Ka-band downlink (17.7 − 20.7 GHz). The proposed solution is based on an end-launcher that allows the direct and simultaneous excitation of the two orthogonal linearly polarized modes in a three-ridge hexagonal waveguide from PCB. A three-ridge hexagonal waveguide polarizer then introduces the 90 degrees phase shift to generate the circular polarization. The proposed design effectively addresses the limitations of conventional in-line waveguide end-launchers reported in the literature, which are typically confined to single-mode or single-polarization excitation. Another significant advantage for large-scale integration is the absence of ohmic contact between the PCB excitation pin and the metal waveguide. The developed feed element provides a compact alternative to septum polarizers and waveguide orthomode transducers. The overall length is less than 26 mm. A seven-element array prototype was fabricated and experimentally characterized to validate the design. The measured results are in good agreement with full-wave simulations, showing reflection and isolation levels of −15 dB and −18 dB, respectively, XPD above 30 dB and insertion loss less than 0.6 dB.
Integrated PCB-to-Waveguide Feed Element for Ka-Band Active Antennas in Dual-Circular Polarization / Montoya-Roca, R., Vazquez-Sogorb, C., Paonessa, F., Lumia, M., Addamo, G., Peverini, O., Maiarelli, D., Virone, G.. - In: IEEE JOURNAL OF MICROWAVES. - ISSN 2692-8388. - ELETTRONICO. - (2026). [10.1109/JMW.2026.3745730]
Integrated PCB-to-Waveguide Feed Element for Ka-Band Active Antennas in Dual-Circular Polarization
Montoya-Roca, Roger;Vazquez-Sogorb, Carlos;Paonessa, Fabio;Lumia, Mauro;Addamo,Giuseppe;Peverini, Oscar;Virone, Giuseppe
2026
Abstract
This paper presents a novel compact PCB-to-waveguide feed element enabling dual-circular polarization for full metal direct radiating arrays operating in the Ka-band downlink (17.7 − 20.7 GHz). The proposed solution is based on an end-launcher that allows the direct and simultaneous excitation of the two orthogonal linearly polarized modes in a three-ridge hexagonal waveguide from PCB. A three-ridge hexagonal waveguide polarizer then introduces the 90 degrees phase shift to generate the circular polarization. The proposed design effectively addresses the limitations of conventional in-line waveguide end-launchers reported in the literature, which are typically confined to single-mode or single-polarization excitation. Another significant advantage for large-scale integration is the absence of ohmic contact between the PCB excitation pin and the metal waveguide. The developed feed element provides a compact alternative to septum polarizers and waveguide orthomode transducers. The overall length is less than 26 mm. A seven-element array prototype was fabricated and experimentally characterized to validate the design. The measured results are in good agreement with full-wave simulations, showing reflection and isolation levels of −15 dB and −18 dB, respectively, XPD above 30 dB and insertion loss less than 0.6 dB.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/3018092
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo
