This paper investigates how external loads and geometric nonlinearities reshape the natural frequencies and mode shapes of a Kagome-lattice mechanical metamaterial. A preload-dependent (pre-stressed) eigenanalysis is performed by linearizing about finite-deformation equilibria obtained using a Carrera Unified Formulation (CUF) of one-dimensional (1D) beam elements enriched by cross-sectional expansion functions. Four configurations are examined: a baseline two-dimensional (2D) lattice, an imperfect lattice with 1.5° pre-rotation, a hinge-stiffened lattice, and a three-dimensional (3D) Kagome architecture. The fundamental mode exhibits softening to buckling followed by hardening; imperfections convert low-order crossings into veering with limited shape change; stiffer hinges flatten frequency-load trends and suppress reshaping. In contrast, the 3D architecture reduces spectral sensitivity and decouples in- and out-of-plane mode families. Higher modes show the largest frequency drops (34.7% in the hinge-stiffened 2D case; 21.9% in 3D). Findings highlight architecture and joint stiffness as primary levers for pre-stress-robust, vibration-resistant designs.
Nonlinear dynamics of metamaterial structures based on Kagome lattices using beam finite elements and a component-wise approach / Augello, R., Carrera, E., Chen, W.Q., Wu, B., Wang, Y.Z.. - In: JOURNAL OF SOUND AND VIBRATION. - ISSN 0022-460X. - 644:(2026). [10.1016/j.jsv.2026.120038]
Nonlinear dynamics of metamaterial structures based on Kagome lattices using beam finite elements and a component-wise approach
Augello, R.;Carrera, E.;
2026
Abstract
This paper investigates how external loads and geometric nonlinearities reshape the natural frequencies and mode shapes of a Kagome-lattice mechanical metamaterial. A preload-dependent (pre-stressed) eigenanalysis is performed by linearizing about finite-deformation equilibria obtained using a Carrera Unified Formulation (CUF) of one-dimensional (1D) beam elements enriched by cross-sectional expansion functions. Four configurations are examined: a baseline two-dimensional (2D) lattice, an imperfect lattice with 1.5° pre-rotation, a hinge-stiffened lattice, and a three-dimensional (3D) Kagome architecture. The fundamental mode exhibits softening to buckling followed by hardening; imperfections convert low-order crossings into veering with limited shape change; stiffer hinges flatten frequency-load trends and suppress reshaping. In contrast, the 3D architecture reduces spectral sensitivity and decouples in- and out-of-plane mode families. Higher modes show the largest frequency drops (34.7% in the hinge-stiffened 2D case; 21.9% in 3D). Findings highlight architecture and joint stiffness as primary levers for pre-stress-robust, vibration-resistant designs.| File | Dimensione | Formato | |
|---|---|---|---|
|
1-s2.0-S0022460X26003998-main_compressed.pdf
accesso aperto
Descrizione: Versione editoriale
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Creative commons
Dimensione
5.35 MB
Formato
Adobe PDF
|
5.35 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/3017457
