The design of optimized Heat Exchangers (HE) represents a key asset in the effort towards transport decarbonization and hydrogen-powered electrification due to the low temperatures required for batteries and high amounts of low-grade waste heat produced by fuel cells. At the same time, advancements in the field of Additive Manufacturing (AM) offer new opportunities for unprecedented geometries: enhancing heat transfer, minimising mass and improving compactness. Within this paper, a new methodology is proposed for the modelling of the thermal-hydraulic performance of compact heat exchangers fabricated via AM. Focus is placed towards the realization of a robust and computationally inexpensive tool for evaluating the performance of a wide range of AM heat exchanger geometries for use in multi-objective optimisation. The methodology is based on flexible physics-driven formulations and extensive model parametrization. The proposed approach is verified against experimental data from the literature, exhibiting accurate heat transfer simulation, with a maximum error of 3.7% with respect to the fluids’ temperature changes. Initial simulations based on current state-of-the-art models showed significant underestimation of the fluids’ pressure drops, of up to -26.4%, when they are applied to AM HEs. However, adjusting the channels’ diameter according to the formation of melting dross, is shown to reduce the maximum hydraulic losses underestimation to just -11.4%. Alternatively, the definition of a calibrated penalty factor, conservatively applied to conventional formulations, allows for the maximum pressure drops to be underestimated by only -4.3%, instead.

Integrated thermo-hydraulic heat exchanger modelling for additive manufacturing optimisation / Favre, Stefano; Di Blasio, Davide; Fletcher, Tom; Brusa, Eugenio; Delprete, Cristiana. - In: APPLIED THERMAL ENGINEERING. - ISSN 1359-4311. - ELETTRONICO. - 280:(2025). [10.1016/j.applthermaleng.2025.128446]

Integrated thermo-hydraulic heat exchanger modelling for additive manufacturing optimisation

Favre, Stefano;Brusa, Eugenio;Delprete, Cristiana
2025

Abstract

The design of optimized Heat Exchangers (HE) represents a key asset in the effort towards transport decarbonization and hydrogen-powered electrification due to the low temperatures required for batteries and high amounts of low-grade waste heat produced by fuel cells. At the same time, advancements in the field of Additive Manufacturing (AM) offer new opportunities for unprecedented geometries: enhancing heat transfer, minimising mass and improving compactness. Within this paper, a new methodology is proposed for the modelling of the thermal-hydraulic performance of compact heat exchangers fabricated via AM. Focus is placed towards the realization of a robust and computationally inexpensive tool for evaluating the performance of a wide range of AM heat exchanger geometries for use in multi-objective optimisation. The methodology is based on flexible physics-driven formulations and extensive model parametrization. The proposed approach is verified against experimental data from the literature, exhibiting accurate heat transfer simulation, with a maximum error of 3.7% with respect to the fluids’ temperature changes. Initial simulations based on current state-of-the-art models showed significant underestimation of the fluids’ pressure drops, of up to -26.4%, when they are applied to AM HEs. However, adjusting the channels’ diameter according to the formation of melting dross, is shown to reduce the maximum hydraulic losses underestimation to just -11.4%. Alternatively, the definition of a calibrated penalty factor, conservatively applied to conventional formulations, allows for the maximum pressure drops to be underestimated by only -4.3%, instead.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/3003420
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo