Metallic interconnects represent the main component of a solid oxide fuel cell (SOFC) stack in terms of weight and volume. They are typically made of ferritic stainless steel (FSS) coated on the air side. At the stack operating conditions, the interconnect is exposed to a dual atmosphere: air at the cathode side; fuel (a hydrogen-rich mixture) at the anode side. The stacks considered in this study were field operated in reformed natural gas for 5000, 9000 and 20,000 h respectively. The analyzed interconnects are made from CROFER22APU and coated on the air side with Co-Mn base spinel. One interconnect has been studied for each stack by sampling and preparing cross section the inlet and outlet positions. The samples were characterized by SEM-EDXS in order to investigate the evolution of the interconnect at the air side. The interaction between the metal substrate and the coating is investigated highlighting the formation of chromia based thermal grown oxide (at the FSS/coating interface) and the solid-state diffusion of Cr and Fe from the metal into the coating. The microstructural features evolving as a function of time are also quantified.

Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side / Ghiara, G; Piccardo, P; Bongiorno, V; Geipel, C; Spotorno, R. - In: ENERGIES. - ISSN 1996-1073. - 13:24(2020), pp. 1-17. [10.3390/en13246487]

Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side

Ghiara, G;
2020

Abstract

Metallic interconnects represent the main component of a solid oxide fuel cell (SOFC) stack in terms of weight and volume. They are typically made of ferritic stainless steel (FSS) coated on the air side. At the stack operating conditions, the interconnect is exposed to a dual atmosphere: air at the cathode side; fuel (a hydrogen-rich mixture) at the anode side. The stacks considered in this study were field operated in reformed natural gas for 5000, 9000 and 20,000 h respectively. The analyzed interconnects are made from CROFER22APU and coated on the air side with Co-Mn base spinel. One interconnect has been studied for each stack by sampling and preparing cross section the inlet and outlet positions. The samples were characterized by SEM-EDXS in order to investigate the evolution of the interconnect at the air side. The interaction between the metal substrate and the coating is investigated highlighting the formation of chromia based thermal grown oxide (at the FSS/coating interface) and the solid-state diffusion of Cr and Fe from the metal into the coating. The microstructural features evolving as a function of time are also quantified.
2020
File in questo prodotto:
File Dimensione Formato  
energies-13-06487.pdf

accesso aperto

Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Creative commons
Dimensione 2.36 MB
Formato Adobe PDF
2.36 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2983089