The investigation of wave propagation in solids requires the development of reliable methods for the prediction of such dynamic events in which the involved materials cover wide ranges of different possible states, governed by plasticity, equation of state, and failure. In the present study, the wave propagation in metals generated by the interaction of high-energy proton beams with solids was considered. In this condition, axisymmetric waves were generated, and, depending on the amount of the delivered energy, different regimes (elastic, plastic, or shock) can be reached. Nonlinear numerical analyses were performed to investigate the material response. The starting point was the energy map delivered into the component as the consequence of the beam impact. The evolution of both hydrodynamic and mechanical quantities was followed starting from the impact and the effects induced on the hit component were investigated. The results showed the portion of the component close to the beam experiences pressure and temperature increase during the deposition phase. The remaining part of the component is traversed by the generated shockwave, which induces high values of strain in a short time or even the failure of the component.
Numerical Modeling of Shockwaves Driven by High-Energy Particle Beam Radiation in Tungsten-Made Structures / Scapin, Martina; Peroni, Lorenzo. - In: METALS. - ISSN 2075-4701. - 12:4(2022), p. 670. [10.3390/met12040670]
Numerical Modeling of Shockwaves Driven by High-Energy Particle Beam Radiation in Tungsten-Made Structures
Martina Scapin;Lorenzo Peroni
2022
Abstract
The investigation of wave propagation in solids requires the development of reliable methods for the prediction of such dynamic events in which the involved materials cover wide ranges of different possible states, governed by plasticity, equation of state, and failure. In the present study, the wave propagation in metals generated by the interaction of high-energy proton beams with solids was considered. In this condition, axisymmetric waves were generated, and, depending on the amount of the delivered energy, different regimes (elastic, plastic, or shock) can be reached. Nonlinear numerical analyses were performed to investigate the material response. The starting point was the energy map delivered into the component as the consequence of the beam impact. The evolution of both hydrodynamic and mechanical quantities was followed starting from the impact and the effects induced on the hit component were investigated. The results showed the portion of the component close to the beam experiences pressure and temperature increase during the deposition phase. The remaining part of the component is traversed by the generated shockwave, which induces high values of strain in a short time or even the failure of the component.File | Dimensione | Formato | |
---|---|---|---|
metals-12-00670 (2).pdf
accesso aperto
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Creative commons
Dimensione
6.68 MB
Formato
Adobe PDF
|
6.68 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2974918