SOLPS-ITER is used to model ASDEX Upgrade L-mode detachment states including the onset of detachment, the fluctuating detachment, and the complete detachment states, considering drifts and mimicking filamentary convective transport with a radial outward velocity in the low field side. The effect of drifts, perpendicular outward convection and core boundary conditions on the numerical solution is presented. The modeling results are validated against experimental data. We find a good agreement of particle flux at the inner target between modeling results and experimental data. On the opposite, at the outer target computations underestimate measured particle flux by a factor of about 2 ∼ 3 in the onset of detachment and the fluctuating detachment states.
SOLPS-ITER modeling of ASDEX Upgrade L-mode detachment states / Wu, H.; Subba, F.; Wischmeier, M.; Cavedon, M.; Zanino, R.. - In: PLASMA PHYSICS AND CONTROLLED FUSION. - ISSN 0741-3335. - ELETTRONICO. - 63:10(2021), p. 105005. [10.1088/1361-6587/ac1568]
SOLPS-ITER modeling of ASDEX Upgrade L-mode detachment states
Wu H.;Subba F.;Wischmeier M.;Zanino R.
2021
Abstract
SOLPS-ITER is used to model ASDEX Upgrade L-mode detachment states including the onset of detachment, the fluctuating detachment, and the complete detachment states, considering drifts and mimicking filamentary convective transport with a radial outward velocity in the low field side. The effect of drifts, perpendicular outward convection and core boundary conditions on the numerical solution is presented. The modeling results are validated against experimental data. We find a good agreement of particle flux at the inner target between modeling results and experimental data. On the opposite, at the outer target computations underestimate measured particle flux by a factor of about 2 ∼ 3 in the onset of detachment and the fluctuating detachment states.File | Dimensione | Formato | |
---|---|---|---|
Wu_2021_Plasma_Phys._Control._Fusion_63_105005.pdf
accesso riservato
Descrizione: Articolo principale
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Non Pubblico - Accesso privato/ristretto
Dimensione
4.29 MB
Formato
Adobe PDF
|
4.29 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
PPCF-103427_manuscript v3.pdf
Open Access dal 04/09/2022
Descrizione: Pdf prodotto dall'ultima versione mandata in revisione, poi accettata dall'editore
Tipologia:
2. Post-print / Author's Accepted Manuscript
Licenza:
Creative commons
Dimensione
2.6 MB
Formato
Adobe PDF
|
2.6 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2959524