Poly(3,4-ethylenedioxythiophene)/manganese oxide coated on porous carbon nanofibers (P-CNFs/PEDOT/MnO2) is developed as an advanced anode material via the innovative combination of multiple routes, such as electrospinning, carbonization and electrodeposition. The structural and morphological characterization of the P-CNFs/PEDOT/MnO2 electrode indicates that crosslinked and rough surface provides, as a strategic point, enough active sites for Li+ storage. PEDOT nanoparticles and irregular block shape of MnO2 are randomly oriented on the P-CNFs surface, thus allowing a possible electron-conducting pathway, increment in catalytic activity as well as a buffer of the volumetric changes upon cycling. Consequently, the obtained P-CNFs/PEDOT/MnO2 electrode exhibits a truly promising electrochemical performance, which displays discharge capacity of 1477 mAh/g, better than that of P-CNFs/PEDOT (1191 mAh/g), P-CNFs/MnO2 (763 mAh/g) and P-CNFs (433 mAh/g), at a current density of 2 mA/g. In addition, satisfactory electrochemical performances of the as-prepared P-CNFs/PEDOT/MnO2 electrode after 20 cycles of charge/discharge are detected, with a Coulombic efficiency higher than 90% and a charge-transfer resistance being relatively smaller (131.91 ohm) than that of P-CNFs/PEDOT (232.66 ohm) and P-CNFs/MnO2 (169.17 ohm) electrodes. Thus, these results indicate that the P-CNFs/PEDOT/MnO2 electrode could offer a great potential to replace commercial graphite for lithium-ion batteries.
Synthesis and electrochemical characterizations of poly(3,4-ethylenedioxythiophene/manganese oxide coated on porous carbon nanofibers as a potential anode for lithium-ion batteries / Abdah, M. A. A. M.; Mokhtar, M.; Khoon, L. T.; Sopian, K.; Dzulkurnain, N. A.; Ahmad, A.; Sulaiman, Y.; Bella, F.; Su’Ait, M. S.. - In: ENERGY REPORTS. - ISSN 2352-4847. - ELETTRONICO. - 7:(2021), pp. 8677-8687. [10.1016/j.egyr.2021.10.110]
Synthesis and electrochemical characterizations of poly(3,4-ethylenedioxythiophene/manganese oxide coated on porous carbon nanofibers as a potential anode for lithium-ion batteries
F. Bella;
2021
Abstract
Poly(3,4-ethylenedioxythiophene)/manganese oxide coated on porous carbon nanofibers (P-CNFs/PEDOT/MnO2) is developed as an advanced anode material via the innovative combination of multiple routes, such as electrospinning, carbonization and electrodeposition. The structural and morphological characterization of the P-CNFs/PEDOT/MnO2 electrode indicates that crosslinked and rough surface provides, as a strategic point, enough active sites for Li+ storage. PEDOT nanoparticles and irregular block shape of MnO2 are randomly oriented on the P-CNFs surface, thus allowing a possible electron-conducting pathway, increment in catalytic activity as well as a buffer of the volumetric changes upon cycling. Consequently, the obtained P-CNFs/PEDOT/MnO2 electrode exhibits a truly promising electrochemical performance, which displays discharge capacity of 1477 mAh/g, better than that of P-CNFs/PEDOT (1191 mAh/g), P-CNFs/MnO2 (763 mAh/g) and P-CNFs (433 mAh/g), at a current density of 2 mA/g. In addition, satisfactory electrochemical performances of the as-prepared P-CNFs/PEDOT/MnO2 electrode after 20 cycles of charge/discharge are detected, with a Coulombic efficiency higher than 90% and a charge-transfer resistance being relatively smaller (131.91 ohm) than that of P-CNFs/PEDOT (232.66 ohm) and P-CNFs/MnO2 (169.17 ohm) electrodes. Thus, these results indicate that the P-CNFs/PEDOT/MnO2 electrode could offer a great potential to replace commercial graphite for lithium-ion batteries.File | Dimensione | Formato | |
---|---|---|---|
M. A. A. M. Abdah et al., Energy Rep. 7 (2021) 8677-8687.pdf
accesso aperto
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Creative commons
Dimensione
3.27 MB
Formato
Adobe PDF
|
3.27 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2947905