Effects of synthesis parameters on the properties and photocatalytic activity of the magnetic catalyst TiO2/CoFe2O4 applied to selenium photoreduction

intake to human health. Heterogeneous photocatalysis can be successfully applied to remove selenium ions from water, but the photocatalyst recovery in the end of the process still needs improvement. The application of a magnetic photocatalyst (TiO2/CoFe2O4) in the Se(IV) photoreduction was investigated, with emphasis in the catalyst magnetic separation. The photocatalyst was synthetized via a simple sol-gel method and a central composite design was considered to evaluate the effects of titanium isopropoxide mass ratio used in the synthesis, calcination temperature and pH on Se(IV) reduction. Calcination temperature showed a strong influence in the photocatalytic activity, and the catalyst calcined at 381 ◦C presented the best performance. In the bests test, at pH 2.61, it was possible to remove >99% selenium after 2 min of exposure to radiation. Photocatalysts containing great amounts of rutile phase produced the lowest removal results. The TiO2/CoFe2O4 photocatalyst was magnetically separable, however its saturation magnetization (2.7 emu g 1) was considerably smaller than pure CoFe2O4 (84.6 emu g 1) and the photocatalyst magnetic separation from the aqueous medium was about 11 times slower in comparison to pure cobalt ferrite. The synthetized photocatalyst was able to satisfactorily photoreduce Se(IV) (96.5%) even after five cycles of photocatalysis.