The hot-lithography stereolithography 3D printing technology is used to print epoxy resins with high reactivity in order to achieve 3D printed structures. Different hydroxyl containing compounds are investigated as chain transfer agents and the viscoelastic properties of UV-cured materials are fully characterized. The most promising formulations are studied at a high temperature, the 3D printing process parameters are defined and the printed object is fully characterized. By combining the suitable precursor materials in the photocurable formulation with the advanced hot-lithography process, it is possible to produce 3D printed structures that are characterized by outstanding thermomechanical properties and good printability precision.
Hot-Lithography SLA-3D Printing of Epoxy Resin / Dall'Argine, C.; Hochwallner, A.; Klikovits, N.; Liska, R.; Stampf, J.; Sangermano, M.. - In: MACROMOLECULAR MATERIALS AND ENGINEERING. - ISSN 1438-7492. - ELETTRONICO. - 305:10(2020), p. 2000325.
Titolo: | Hot-Lithography SLA-3D Printing of Epoxy Resin |
Autori: | |
Data di pubblicazione: | 2020 |
Rivista: | |
Digital Object Identifier (DOI): | http://dx.doi.org/10.1002/mame.202000325 |
Appare nelle tipologie: | 1.1 Articolo in rivista |
File in questo prodotto:
File | Descrizione | Tipologia | Licenza | |
---|---|---|---|---|
Hot-lithography 3D printing.pdf | 2a Post-print versione editoriale / Version of Record | Non Pubblico - Accesso privato/ristretto | Administrator Richiedi una copia | |
hot-lithography 3D printing.pdf | 2. Post-print / Author's Accepted Manuscript | PUBBLICO - Tutti i diritti riservati | Embargo: 16/08/2021 Richiedi una copia |
http://hdl.handle.net/11583/2858655