Currently, around 85% of the energy matrix is dependent on fossil fuels. Burning fossil fuels provokes environmental pollutants such as CO2, which is the most representative GHG and its concentration has increased in the atmosphere after industrial revolution to >410 ppm[1]. Therefore, to mitigate CO2 emissions into the atmosphere, it can be exploited as a raw material to synthesize high added-value products (i.e. methanol) [2]. The electrochemical (EC) reduction of CO2 is a sustainable and technologically interesting process to produce chemicals or fuels using renewable electricity sources[3]. The main challenge is to find a suitable electrocatalyst to establish this technology at an industrial level. In such context, our group have exploited, for this EC process, a Cu-based material typically used as catalyst in Thermochemical (TC) catalysis for the production of methanol. A commercial catalyst (Cu-Zn-Al-based) was tested for both processes for comparison. The TC CO2 reduction reaction in H2 atmosphere (25 bars and 250 °C) leads to a methanol selectivity of 50% and CO as side-product, whereas the EC process (at atmospheric conditions) yields different alcohols and other C-based products (C1 to C3) with an overall faradaic efficiency of ~70%. The EX situ X-ray diffraction pattern, Field-Emission Electron Microscopy and Transmission Electron Microcopy of the catalyst were compared before and after both experiments in order to study the role of the modification of the catalyst components during operation in the final selectivity. These results demonstrated that there is synergy between both processes that can be exploited to develop new electrocatalysts.

Catalytic vs electrocatalytic reduction of CO2 to added-value products / Hilmar, Guzmán; Salomone, Fabio; Fontana, Marco; Bejtka, KATARZYNA TERESA; Bensaid, Samir; Russo, Nunzio; Simelys, Hernández. - STAMPA. - (2019). (Intervento presentato al convegno CO2OLING THE EARTH, 1st tenutosi a Amsterdam nel 5th-6th September 2019).

Catalytic vs electrocatalytic reduction of CO2 to added-value products

Hilmar, Guzmán;Fabio, Salomone;Marco, Fontana;Katarzyna, Bejtka;Samir, Bensaid;Nunzio, Russo;Simelys, Hernández
2019

Abstract

Currently, around 85% of the energy matrix is dependent on fossil fuels. Burning fossil fuels provokes environmental pollutants such as CO2, which is the most representative GHG and its concentration has increased in the atmosphere after industrial revolution to >410 ppm[1]. Therefore, to mitigate CO2 emissions into the atmosphere, it can be exploited as a raw material to synthesize high added-value products (i.e. methanol) [2]. The electrochemical (EC) reduction of CO2 is a sustainable and technologically interesting process to produce chemicals or fuels using renewable electricity sources[3]. The main challenge is to find a suitable electrocatalyst to establish this technology at an industrial level. In such context, our group have exploited, for this EC process, a Cu-based material typically used as catalyst in Thermochemical (TC) catalysis for the production of methanol. A commercial catalyst (Cu-Zn-Al-based) was tested for both processes for comparison. The TC CO2 reduction reaction in H2 atmosphere (25 bars and 250 °C) leads to a methanol selectivity of 50% and CO as side-product, whereas the EC process (at atmospheric conditions) yields different alcohols and other C-based products (C1 to C3) with an overall faradaic efficiency of ~70%. The EX situ X-ray diffraction pattern, Field-Emission Electron Microscopy and Transmission Electron Microcopy of the catalyst were compared before and after both experiments in order to study the role of the modification of the catalyst components during operation in the final selectivity. These results demonstrated that there is synergy between both processes that can be exploited to develop new electrocatalysts.
2019
File in questo prodotto:
File Dimensione Formato  
CO2olingEarth_Abstract-HilmarG.pdf

accesso aperto

Descrizione: Abstract
Tipologia: Altro materiale allegato
Licenza: PUBBLICO - Tutti i diritti riservati
Dimensione 76.68 kB
Formato Adobe PDF
76.68 kB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2842791