Stratigraphic forward modelling (SFM) provide the means to produce geologically coherent and realistic models. In this paper, we demonstrate the possibility of matching lithological variability simulated with a basin-scale advection-diffusion SFM to a data-rich real-world setting, i.e. the Holocene Rhine-Meuse fluvio-deltaic system in the Netherlands. SFM model calibration to real-world data in general has proven non-trivial. This study focuses on a novel inversion process constrained by the top surface and the sand proportion observed at specific pseudo-wells in the study area. Goodness-of-fit expressed by a new fitness function, gives the error calculated as the average of two calibration constraints. Computational efficiency was increased significantly by implementing a new optimization process in two hierarchical steps: a) optimization in terms of sediment load and discharge, which are the most influential parameters having the largest uncertainty and b) optimization with respect to the remaining uncertain parameters, these being sediment transport parameters. The calibration process described allows for the most optimal combination of achieving acceptable levels of goodness-of-fit, feasible runtimes and multiple (non-unique) solutions to obtain synthetic stratigraphic output best matching real-world datasets. By removing model realizations which are geologically unrealistic, calibrated SFM models provide a multiscale stratigraphic framework for reconstructing static models of reservoirs which are consistent with the palaeogeographic layout, basin-fill history and external drivers (e.g. sea level, sediment supply). The static reservoir models that are matched with highest certainty therefore contain the highest geological realism and may be used to improve deep subsurface reservoir or aquifer property prediction. The new methodology was applied to the well-established Holocene Rhine-Meuse dataset which allows a rigorous testing of the optimization and the calibrated SFM allows investigation of controls of the Holocene development on the sedimentary system.

Improved lithology prediction in channelized reservoirs by integrating stratigraphic forward modelling: towards improved model calibration in a case study of the Holocene Rhine-Meuse fluvio-deltaic system / Peter, Costanzo; SALINA BORELLO, Eloisa; Dalman, Rory A. F.; Karamitopoulos, Pantelis; Busschers, Freek; Sacchi, QUINTO RENATO; Verga, Francesca. - In: COMPUTERS & GEOSCIENCES. - ISSN 0098-3004. - ELETTRONICO. - 141:(2020). [10.1016/j.cageo.2020.104517]

Improved lithology prediction in channelized reservoirs by integrating stratigraphic forward modelling: towards improved model calibration in a case study of the Holocene Rhine-Meuse fluvio-deltaic system.

Costanzo Peter;Eloisa Salina Borello;Quinto Sacchi;Francesca Verga
2020

Abstract

Stratigraphic forward modelling (SFM) provide the means to produce geologically coherent and realistic models. In this paper, we demonstrate the possibility of matching lithological variability simulated with a basin-scale advection-diffusion SFM to a data-rich real-world setting, i.e. the Holocene Rhine-Meuse fluvio-deltaic system in the Netherlands. SFM model calibration to real-world data in general has proven non-trivial. This study focuses on a novel inversion process constrained by the top surface and the sand proportion observed at specific pseudo-wells in the study area. Goodness-of-fit expressed by a new fitness function, gives the error calculated as the average of two calibration constraints. Computational efficiency was increased significantly by implementing a new optimization process in two hierarchical steps: a) optimization in terms of sediment load and discharge, which are the most influential parameters having the largest uncertainty and b) optimization with respect to the remaining uncertain parameters, these being sediment transport parameters. The calibration process described allows for the most optimal combination of achieving acceptable levels of goodness-of-fit, feasible runtimes and multiple (non-unique) solutions to obtain synthetic stratigraphic output best matching real-world datasets. By removing model realizations which are geologically unrealistic, calibrated SFM models provide a multiscale stratigraphic framework for reconstructing static models of reservoirs which are consistent with the palaeogeographic layout, basin-fill history and external drivers (e.g. sea level, sediment supply). The static reservoir models that are matched with highest certainty therefore contain the highest geological realism and may be used to improve deep subsurface reservoir or aquifer property prediction. The new methodology was applied to the well-established Holocene Rhine-Meuse dataset which allows a rigorous testing of the optimization and the calibrated SFM allows investigation of controls of the Holocene development on the sedimentary system.
File in questo prodotto:
File Dimensione Formato  
Peter et al_non_editoriale.pdf

Open Access dal 16/05/2022

Descrizione: Articolo Principale non editoriale
Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Creative commons
Dimensione 5.95 MB
Formato Adobe PDF
5.95 MB Adobe PDF Visualizza/Apri
Peter_et_al.pdf

accesso riservato

Descrizione: Articolo Principale
Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 2.53 MB
Formato Adobe PDF
2.53 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2831781