Occupational Safety and Health - OS&H issues and the processing of the measurement results on Hazard Factors are strictly linked: measuring campaigns allow defining and preserving the Safety design parameters (e.g. the work environment pollution evaluation and control), measurement results lay at the very base of Quality controls. Furthermore, the protection of Safety and Health of workers requires the definition of exposure models based on the quantification of Hazard Factors. The workers’ exposure models in particular should be based on: 1. the identification of the exposed workers (only apparently an easy task in the modern industrial and construction scenarios); 2. the analysis of the exposure way, frequency and duration; 3. measuring processes aimed to effectively characterize, with the necessary detail, the Hazard Factors (physical, chemical, biological) which can compromise the workers Safety and Health; 4. statistical criteria suitable to ensure the representativeness of the achieved measurement results, essential to make comparisons with the limit values suggested by Safety regulations, standards and good practices. The first two steps represent the target of the measuring campaigns design; the Risk analyst should devote special care on the preliminary examination of the activity, to obtain all the information necessary to define a measuring program suitable to provide -in each special situation under exam- correct data on the workers exposure to the investigated Hazard Factors. The two following steps are pivotal to ensure that the measurement results, thanks to their quality, detail and statistical representativeness, can be correctly used as reliable input data for the assessment of the actual workers’ exposure scenario, and its comparison with the limit values suggested by Safety regulations, standards and good practices, effectively supporting the decision making process on control design if necessary. A practical example clarifies, with calculations based on actual airborne particulate pollution data, the criteria above discussed.
Representativeness of the measurements results: a key issue for Occupational Risk Assessment and Management. Discussion on air dispersed particulates / Bisio, Paolo; Fargione, Paolo; Maida, LUISA MARIA TERESA. - In: GEAM. GEOINGEGNERIA AMBIENTALE E MINERARIA. - ISSN 1121-9041. - STAMPA. - 150:1(2017), pp. 37-45.
Representativeness of the measurements results: a key issue for Occupational Risk Assessment and Management. Discussion on air dispersed particulates
FARGIONE, PAOLO;MAIDA, LUISA MARIA TERESA
2017
Abstract
Occupational Safety and Health - OS&H issues and the processing of the measurement results on Hazard Factors are strictly linked: measuring campaigns allow defining and preserving the Safety design parameters (e.g. the work environment pollution evaluation and control), measurement results lay at the very base of Quality controls. Furthermore, the protection of Safety and Health of workers requires the definition of exposure models based on the quantification of Hazard Factors. The workers’ exposure models in particular should be based on: 1. the identification of the exposed workers (only apparently an easy task in the modern industrial and construction scenarios); 2. the analysis of the exposure way, frequency and duration; 3. measuring processes aimed to effectively characterize, with the necessary detail, the Hazard Factors (physical, chemical, biological) which can compromise the workers Safety and Health; 4. statistical criteria suitable to ensure the representativeness of the achieved measurement results, essential to make comparisons with the limit values suggested by Safety regulations, standards and good practices. The first two steps represent the target of the measuring campaigns design; the Risk analyst should devote special care on the preliminary examination of the activity, to obtain all the information necessary to define a measuring program suitable to provide -in each special situation under exam- correct data on the workers exposure to the investigated Hazard Factors. The two following steps are pivotal to ensure that the measurement results, thanks to their quality, detail and statistical representativeness, can be correctly used as reliable input data for the assessment of the actual workers’ exposure scenario, and its comparison with the limit values suggested by Safety regulations, standards and good practices, effectively supporting the decision making process on control design if necessary. A practical example clarifies, with calculations based on actual airborne particulate pollution data, the criteria above discussed.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2678922
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo