In ITER, so-called “Irregular” Field Joints (IFJs) are foreseen at the interface between irregular sectors of the Vacuum Vessel (VV), which is located inside the cryostat and houses the in-vessel components. In the IFJs, a peculiar design of the equatorial port, with respect to that adopted in the Regular Field Joints (RFJs), accommodates the irregularities of the adjacent VV sectors. The IFJs are subject to nuclear heating and actively cooled by sub-cooled pressurized water flowing in a dedicated hydraulic loop, which includes the space left open by the borated In-Wall Shielding (IWS). Here we perform the 3D steady state thermal-hydraulic analysis of two different IFJs using the Computational Fluid Dynamics (CFD) software ANSYS-FLUENT®. The water flow field, the pressure drop and the temperature maps are computed. The thermal performance of the IFJs in nominal operation is compared to that of an RFJ and it is shown that also in this case enough cooling capability is available to avoid hot spots above the design limits, while the pressure drop remains acceptably low.

3D thermal-hydraulic analysis of two irregular field joints for the ITER vacuum vessel / Savoldi, Laura; Bonifetto, Roberto; Izquierdo, J.; Le Barbier, R.; Utin, Y. u.; Zanino, Roberto. - In: FUSION ENGINEERING AND DESIGN. - ISSN 0920-3796. - STAMPA. - 98-99:(2015), pp. 1605-1609. [10.1016/j.fusengdes.2015.06.038]

3D thermal-hydraulic analysis of two irregular field joints for the ITER vacuum vessel

SAVOLDI, LAURA;BONIFETTO, ROBERTO;ZANINO, Roberto
2015

Abstract

In ITER, so-called “Irregular” Field Joints (IFJs) are foreseen at the interface between irregular sectors of the Vacuum Vessel (VV), which is located inside the cryostat and houses the in-vessel components. In the IFJs, a peculiar design of the equatorial port, with respect to that adopted in the Regular Field Joints (RFJs), accommodates the irregularities of the adjacent VV sectors. The IFJs are subject to nuclear heating and actively cooled by sub-cooled pressurized water flowing in a dedicated hydraulic loop, which includes the space left open by the borated In-Wall Shielding (IWS). Here we perform the 3D steady state thermal-hydraulic analysis of two different IFJs using the Computational Fluid Dynamics (CFD) software ANSYS-FLUENT®. The water flow field, the pressure drop and the temperature maps are computed. The thermal performance of the IFJs in nominal operation is compared to that of an RFJ and it is shown that also in this case enough cooling capability is available to avoid hot spots above the design limits, while the pressure drop remains acceptably low.
File in questo prodotto:
File Dimensione Formato  
ITER_IFJ.pdf

non disponibili

Descrizione: Articolo principale
Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 2.61 MB
Formato Adobe PDF
2.61 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

Caricamento pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/11583/2614377
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo