Archivio Istituzionale della RicercaIn the present paper a SP made up of a Venturi Flow Meter (VFM) coupled with a WMS is proposed. The VFM allows the estimation of the fluid flow rate from the pressure drop across a pipe restriction. This is perhaps the most commonly used flow measurement technique in industrial applications; in two phase flow, due to the interaction between the gas and the liquid phase, the estimated mass flow rate must to be corrected using available correlations derived from experimental data or semi-empirical models
A Model for a Spool Piece made up of Venturi and Void fraction Flow Meter in Horizontal Flow / DE SALVE, Mario; Monni, Grazia; Panella, Bruno. - In: TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY. - ISSN 0003-018X. - STAMPA. - 108:(2013), pp. 1013-1016.
A Model for a Spool Piece made up of Venturi and Void fraction Flow Meter in Horizontal Flow
DE SALVE, Mario;MONNI, GRAZIA;PANELLA, BRUNO
2013
Abstract
In the present paper a SP made up of a Venturi Flow Meter (VFM) coupled with a WMS is proposed. The VFM allows the estimation of the fluid flow rate from the pressure drop across a pipe restriction. This is perhaps the most commonly used flow measurement technique in industrial applications; in two phase flow, due to the interaction between the gas and the liquid phase, the estimated mass flow rate must to be corrected using available correlations derived from experimental data or semi-empirical models
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2513775
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo