Archivio Istituzionale della RicercaThe paper presents the tensile behavior of sintered steels developed through a new process called gascarbusintering (GCS), consisting of carburizing in gas (CH4) of a set of iron based powder compacts followed by sintering. The influence of compaction pressure and dwell time at the carburizing temperature on the tensile properties of steels processed by GCS is investigated. Mechanical tests revealed that investigated GCS steels show Rm ranging from (180-315) MPa, Young's modulus from (125-150) GPa, with values increasing with increasing compaction pressures (from 400 to 600 MPa), and with increasing dwell time of carburizing (from 120 to 240 minutes).
The effect of "GASCARBUSINT" on tensile properties of sintered steels / Criveanu, M. C.; Rosso, Mario; ACTIS GRANDE, Marco. - In: JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS. - ISSN 1454-4164. - STAMPA. - 15, No 7-8:(2013), pp. 803-806.
The effect of "GASCARBUSINT" on tensile properties of sintered steels
ROSSO, MARIO;ACTIS GRANDE, MARCO
2013
Abstract
The paper presents the tensile behavior of sintered steels developed through a new process called gascarbusintering (GCS), consisting of carburizing in gas (CH4) of a set of iron based powder compacts followed by sintering. The influence of compaction pressure and dwell time at the carburizing temperature on the tensile properties of steels processed by GCS is investigated. Mechanical tests revealed that investigated GCS steels show Rm ranging from (180-315) MPa, Young's modulus from (125-150) GPa, with values increasing with increasing compaction pressures (from 400 to 600 MPa), and with increasing dwell time of carburizing (from 120 to 240 minutes).
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2511689
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo