Maintaining suitable indoor climate conditions is a need for the occupants' well being, while requiring very strictly thermal comfort conditions and very high levels of indoor air quality in buildings represents also a high expense of energy, with its consequence in terms of environmental impact and cost. In fact, it is well known that the indoor environmental quality (IEQ), considering both thermal and indoor air quality aspects, has a primary impact not only on the perceived human comfort, but also on the building energy consumption. This issue is clearly expressed by the European Energy Performance of Buildings Directive 2002/92/EC, together with the most recent 2010/31/EU, which underlines that the expression of a judgment about the energy consumption of a building should be always joint with the corresponding indoor environmental quality level required by occupants. To this aim, the concept of indoor environment categories has been introduced in the EN 15251 standard. These categories range from I to III, where category I refers to the highest level of indoor climate requirement. In the challenge of reducing the environmental impact for air conditioning in buildings, it is essential that IEQ requirements are relaxed in order to widen the variations of the temperature ranges and ventilation air flow rates. In this paper, by means of building energy simulation, the heating and cooling energy demand are calculated for a mechanically controlled office building where different indoor environmental quality levels are required, ranging from category I to category III of EN 15251. The building is located in different European cities (Moscow, Torino and Athens), characterized by significantly different wheatear conditions. The mutual relation between heating and cooling energy demand and the required levels of IEQ is highlighted. The simulations are performed on a typical office room which is adopted as a reference in validation tests of the European Standard EN 15265 to validate calculation procedures of energy use for space heating and cooling.
Categories of indoor environmental quality and building energy demand for heating and cooling / Corgnati S.P.; Fabrizio E.; Raimondo D.; Filippi M.. - In: BUILDING SIMULATION. - ISSN 1996-3599. - 4:2(2011), pp. 97-105. [10.1007/s12273-011-0023-x]
|Titolo:||Categories of indoor environmental quality and building energy demand for heating and cooling|
|Data di pubblicazione:||2011|
|Digital Object Identifier (DOI):||http://dx.doi.org/10.1007/s12273-011-0023-x|
|Appare nelle tipologie:||1.1 Articolo in rivista|
File in questo prodotto: