Future linear accelerators, as CLIC (Compact LInear Collider), are extremely demanding in terms of material properties. Traditionally accelerating structure is made of brazed OFE copper parts. For the high conducting regions submitted to mechanical fatigue, CuZr would represent an improved selection than pure copper while for regions where the highest electric field is applied a refractory metal, i.e. Mo, could result in a better performance. The feasibility of joining such materials, namely CuZr (UNS C15000) and pure Mo has been investigated. The joining method developed and investigated here consists in a vacuum brazing process exploiting a Cu-based brazing filler applied under appropriate vacuum conditions. Apparent shear strength (adapted from ASTM B898) on the joined samples was about 200 MPa.
Brazing of Mo to a CuZr alloy for the production of bimetallic raw materials for the CLIC accelerating structures / Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Ferraris, Monica; Izquierdo, G. A.; Heikkinen, S.; Sgobba, S.; Taborelli, M.. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - STAMPA. - 210:(2010), pp. 791-798. [10.1016/j.jmatprotec.2010.01.010]
Brazing of Mo to a CuZr alloy for the production of bimetallic raw materials for the CLIC accelerating structures
SALVO, Milena;CASALEGNO, VALENTINA;RIZZO, STEFANO;FERRARIS, Monica;
2010
Abstract
Future linear accelerators, as CLIC (Compact LInear Collider), are extremely demanding in terms of material properties. Traditionally accelerating structure is made of brazed OFE copper parts. For the high conducting regions submitted to mechanical fatigue, CuZr would represent an improved selection than pure copper while for regions where the highest electric field is applied a refractory metal, i.e. Mo, could result in a better performance. The feasibility of joining such materials, namely CuZr (UNS C15000) and pure Mo has been investigated. The joining method developed and investigated here consists in a vacuum brazing process exploiting a Cu-based brazing filler applied under appropriate vacuum conditions. Apparent shear strength (adapted from ASTM B898) on the joined samples was about 200 MPa.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2364826
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo