Realization of a phase-coherent optical fiber link for the comparison of remote atomic clocks

This thesis describes the realization of a facility for the high-accuracy frequency dissemination on a continental scale. This project was developed at the Optics division of the Italian National Metrology Institute (INRIM), which is in charge of the realization and operation of the atomic primary frequency standards, of their dissemination, and cooperates to the International Atomic Time generation. Frequency dissemination is now based on satellite techniques; however, the resolution provided by these methods does not cope with the accuracy and stability of newgeneration frequency standards. For instance, more than 10 days of measurement are needed to effectively compare primary standards, and years would be necessary to compare optical clocks via satellite links. On the other hand, it has been demonstrated that systems based on optical fibers can improve the resolution by about 5 orders of magnitude with respect to satellite techniques. This is the reason why many national metrology institutes in Europe are cooperating to develop a network for frequency dissemination and clocks comparisons all across the continent. This technique is based on the transmission of a narrow-linewidth laser along a standard telecom fiber. At the metrological laboratory, the frequency is measured with respect to a frequency standard, while at the remote link end it is extracted and used as a frequency reference. However, temperature changes, acoustic noise, air flows can degrade the stability of the delivered frequency, and must therefore be compensated. This is done through a Doppler cancellation technique, in which the light travels twice in the optical fiber in opposite directions. This is different from what happens in telecom links, which are inherently bidirectional. Dedicated instruments have therefore been developed. This thesis describes the realization of a phase-stabilized optical link between INRIM and the European Laboratory for Non Linear Spectroscopy in Florence, where an optical clock based on Sr atoms was under development at the time of measurements. This clock has been compared to the INRIM primary standard via the optical link. I worked on the realization of the ultrastable laser sources, on the development and characterization of the optical and electronics apparatus, and at the development of the metrological chain for the remote clocks comparison. This thesis also describes some novel techniques which we investigated in the framework of this project, and new applications of optical fiber links. During my studies I spent two months at the Laboratoire National d’Essais-Systemes de Référence Temps-Espace (LNE-SYRTE) in Paris, where I cooperated to the realization of an ultrastable laser source based on an optical delay line. This is reported in the thesis as well.