Bladed-disks in turbo-machines experience high cycle fatigue failures due to high vibration amplitudes. Therefore, it is important to accurately predict their dynamic characteristics including the mechanical joints at blade-disk (root joint) or blade-blade (shroud) interfaces. These joints help in dampening the vibration amplitudes. Before the experimental identification of these joints, it is of paramount importance to accurately measure the interface degrees-of-freedom (DoF). However, they are largely inaccessible for the measurements. For this reason, expansion techniques are used in order to update the single components before their coupling. But the expansion can be affected adversely if the measurements are not properly correlated with the updated model or if they have significant errors. Therefore, a frequency domain expansion method called System Equivalent Model Mixing (SEMM) is used to expand a limited set of measurements to a larger set of numerical DoF. Different measured models — termed the overlay models — are taken from an impact testing campaign of a blade and a disk and coupled to the numerical model according to the SEMM. The expanded models — termed the hybrid models — are then correlated with the validation channels in a round-robin way by means of Frequency Response Assurance Criteria (FRAC). The global correlations depict whether or not a measurement and the respective expansion is properly correlated. By this approach, the least correlated channels can be done away with from the measurements to have a better updated hybrid model. The method is tested on both the structures (the blade and the disk) and it is successfully shown that removing the uncorrelated channels does improve the quality of the hybrid models.

Hybrid Numerical-Experimental Model Update Based on Correlation Approach for Turbine Components / Saeed, Zeeshan; Firrone, Christian Maria; Berruti, Teresa Maria. - ELETTRONICO. - 11:(2020), pp. 1-12. (Intervento presentato al convegno Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition tenutosi a Virtual, Online nel September 21–25) [10.1115/GT2020-16308].

Hybrid Numerical-Experimental Model Update Based on Correlation Approach for Turbine Components

Saeed, Zeeshan;Firrone, Christian Maria;Berruti, Teresa Maria
2020

Abstract

Bladed-disks in turbo-machines experience high cycle fatigue failures due to high vibration amplitudes. Therefore, it is important to accurately predict their dynamic characteristics including the mechanical joints at blade-disk (root joint) or blade-blade (shroud) interfaces. These joints help in dampening the vibration amplitudes. Before the experimental identification of these joints, it is of paramount importance to accurately measure the interface degrees-of-freedom (DoF). However, they are largely inaccessible for the measurements. For this reason, expansion techniques are used in order to update the single components before their coupling. But the expansion can be affected adversely if the measurements are not properly correlated with the updated model or if they have significant errors. Therefore, a frequency domain expansion method called System Equivalent Model Mixing (SEMM) is used to expand a limited set of measurements to a larger set of numerical DoF. Different measured models — termed the overlay models — are taken from an impact testing campaign of a blade and a disk and coupled to the numerical model according to the SEMM. The expanded models — termed the hybrid models — are then correlated with the validation channels in a round-robin way by means of Frequency Response Assurance Criteria (FRAC). The global correlations depict whether or not a measurement and the respective expansion is properly correlated. By this approach, the least correlated channels can be done away with from the measurements to have a better updated hybrid model. The method is tested on both the structures (the blade and the disk) and it is successfully shown that removing the uncorrelated channels does improve the quality of the hybrid models.
2020
978-0-7918-8423-2
File in questo prodotto:
File Dimensione Formato  
v011t30a042-gt2020-16308.pdf

accesso aperto

Descrizione: Editorial_version_open_access
Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Creative commons
Dimensione 3.03 MB
Formato Adobe PDF
3.03 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2862081