The hot-lithography stereolithography 3D printing technology is used to print epoxy resins with high reactivity in order to achieve 3D printed structures. Different hydroxyl containing compounds are investigated as chain transfer agents and the viscoelastic properties of UV-cured materials are fully characterized. The most promising formulations are studied at a high temperature, the 3D printing process parameters are defined and the printed object is fully characterized. By combining the suitable precursor materials in the photocurable formulation with the advanced hot-lithography process, it is possible to produce 3D printed structures that are characterized by outstanding thermomechanical properties and good printability precision.

Hot-Lithography SLA-3D Printing of Epoxy Resin / Dall'Argine, C.; Hochwallner, A.; Klikovits, N.; Liska, R.; Stampf, J.; Sangermano, M.. - In: MACROMOLECULAR MATERIALS AND ENGINEERING. - ISSN 1438-7492. - ELETTRONICO. - 305:10(2020), p. 2000325. [10.1002/mame.202000325]

Hot-Lithography SLA-3D Printing of Epoxy Resin

Sangermano M.
2020

Abstract

The hot-lithography stereolithography 3D printing technology is used to print epoxy resins with high reactivity in order to achieve 3D printed structures. Different hydroxyl containing compounds are investigated as chain transfer agents and the viscoelastic properties of UV-cured materials are fully characterized. The most promising formulations are studied at a high temperature, the 3D printing process parameters are defined and the printed object is fully characterized. By combining the suitable precursor materials in the photocurable formulation with the advanced hot-lithography process, it is possible to produce 3D printed structures that are characterized by outstanding thermomechanical properties and good printability precision.
File in questo prodotto:
File Dimensione Formato  
Hot-lithography 3D printing.pdf

non disponibili

Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 3.69 MB
Formato Adobe PDF
3.69 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
hot-lithography 3D printing.pdf

Open Access dal 17/08/2021

Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: PUBBLICO - Tutti i diritti riservati
Dimensione 1.2 MB
Formato Adobe PDF
1.2 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2858655