Characterization of atmospheric properties remains a latent ambiguity for weather forecasting and climate models since their characteristics depends on multidisciplinary processes in a wide range of natural scales. The development of ultra-small light disposable radio probes is important to understand this properties Being light-weighted, the probes will have a fluiddifferent atmospheric layers after been released, thus simulating the behaviour of small particles (e.g. drops). Each disposable probe is equipped with compact size microprocessors (presently the first prototype uses velocity, acceleration, pressure, temperature). The probes collect, store and then send the coded information to a base station located at the ground through a dedicated radio transmission link. It is to be noted that longrange communication link (10 km) should be assured with low power consumption technology: a network -modules and the base station is the potential adopted solution. In order to realize the communication system for the atmospheric probes, some prototypal links and networks have bene realized using the Adafruit Feather 32u4 LoRa Radio RFM95 modules. It is an embedded module, which contains a LoRa transceiver RFM95 and an ATmega32u4 microcontroller. The radio module can be powered using 3.3 volts either by using a micro USB or an external battery and it can transmit from +5 dBm to +20 dBm, which are theoretically enough for the purpose of this study. The present work presents the preliminary measurements made both in indoor and outdoor environment considering differ find the best set of parameters to work in the harsh environment to acquire information about warm clouds and send them to the ground receiver. Particularly detailed measurements have been made in harsh environmental found inside a warm cloud. The measurements techniques and results are presented together with the realization of a first operational prototype of both probes and ground receiver.

ON THE REALIZATION OF A COMMUNICATION SYSTEM FOR ATMOSPHERIC PROBES BASED ON LORA TECHNOLOGIES: PRELIMINARY MEASUREMENTS AND RESULTS / Carosso, Lorenzo; Bertoldo, Silvano; Miryam, Paredes; Allegretti, Marco. - ELETTRONICO. - (2018). (Intervento presentato al convegno WMESS 2018 tenutosi a Prague - Czech Republic nel 03-07 September 2018).

ON THE REALIZATION OF A COMMUNICATION SYSTEM FOR ATMOSPHERIC PROBES BASED ON LORA TECHNOLOGIES: PRELIMINARY MEASUREMENTS AND RESULTS

Lorenzo Carosso;Silvano Bertoldo;Miryam Paredes;Marco Allegretti
2018

Abstract

Characterization of atmospheric properties remains a latent ambiguity for weather forecasting and climate models since their characteristics depends on multidisciplinary processes in a wide range of natural scales. The development of ultra-small light disposable radio probes is important to understand this properties Being light-weighted, the probes will have a fluiddifferent atmospheric layers after been released, thus simulating the behaviour of small particles (e.g. drops). Each disposable probe is equipped with compact size microprocessors (presently the first prototype uses velocity, acceleration, pressure, temperature). The probes collect, store and then send the coded information to a base station located at the ground through a dedicated radio transmission link. It is to be noted that longrange communication link (10 km) should be assured with low power consumption technology: a network -modules and the base station is the potential adopted solution. In order to realize the communication system for the atmospheric probes, some prototypal links and networks have bene realized using the Adafruit Feather 32u4 LoRa Radio RFM95 modules. It is an embedded module, which contains a LoRa transceiver RFM95 and an ATmega32u4 microcontroller. The radio module can be powered using 3.3 volts either by using a micro USB or an external battery and it can transmit from +5 dBm to +20 dBm, which are theoretically enough for the purpose of this study. The present work presents the preliminary measurements made both in indoor and outdoor environment considering differ find the best set of parameters to work in the harsh environment to acquire information about warm clouds and send them to the ground receiver. Particularly detailed measurements have been made in harsh environmental found inside a warm cloud. The measurements techniques and results are presented together with the realization of a first operational prototype of both probes and ground receiver.
File in questo prodotto:
File Dimensione Formato  
Lorenzo_Carosso_Abstract_WMESS.pdf

accesso aperto

Descrizione: Published Abstract
Tipologia: Abstract
Licenza: PUBBLICO - Tutti i diritti riservati
Dimensione 276.82 kB
Formato Adobe PDF
276.82 kB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2721125
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo