Towards high accuracy GNSS real-time positioning with smartphones

The possibility to access undifferenced and uncombined Global Navigation Satellite System (GNSS) measurements on smart devices with an Android operating system allows us to manage pseudorange and carrier-phase measurements to increase the accuracy of real-time positioning. The goal is to perform real-time kinematic network positioning with smartphones, evaluating the positioning accuracy regarding an external mass-market device. The positioning of Samsung Galaxy S8+ and Huawei P10 plus smartphones was performed using a dedicated tool developed by the authors, considering a continuous operating reference station (CORS) network with a mean inter-station distance of about 50 km. The same positioning technique was also applied to an external GNSS low-cost single-frequency receiver (u-blox EVK-M8T) to compare performance between the receiver and antenna embedded in the previous smartphones and this low-cost receiver coupled with a mass-market antenna (Garmin GA38). Attention was also focused on the phase ambiguity resolution, that it is still a challenging aspect for mass-market devices: even if the two smartphones provide slightly different results, the accuracy obtainable today is greater than 60 cm with a precision of few centimetres in real-time, if a CORS network is available. For real-time applications using portable devices, decimetre-level accuracy is sufficient for many applications, such as rapid mapping and search and rescue activities: these results will open new frontiers in terms of real-time positioning with portable low-cost devices.