This paper reports on an epoxy matrix for glass fibre reinforced polymers equipped with low cost optical fibre sensors for the early detection of water diffusion, with devised applications in the oil and gas industry. Novel evanescent wave optical fibre sensors were designed, fabricated and embedded in epoxy resin samples. The tips of the optical fibre sensors were coated with a silver layer to work in reflection, so that they could be used as probes. Accelerated diffusion tests were performed: the samples were exposed to simulated sea water at 80 °C for up to 148 hours. The water diffusion resulted in a remarkable change of the reflected signal from the sensors, a result that was then confirmed through gravimetric measurements and a theoretical prediction, according to Fick’s diffusion law. The results corroborate the feasibility of “sensitive” fibre reinforced polymers in harsh environments and that chemicals diffusion in these materials can be remotely and continuously monitored by means of the presented sensing system.

Towards self-diagnosis composites: Detection of moisture diffusion through epoxy by embedded evanescent wave optical fibre sensors / Marro Bellot, Cristian; Olivero, Massimo; Sangermano, Marco; Salvo, Milena. - In: POLYMER TESTING. - ISSN 0142-9418. - 71:(2018), pp. 248-254. [10.1016/j.polymertesting.2018.09.019]

Towards self-diagnosis composites: Detection of moisture diffusion through epoxy by embedded evanescent wave optical fibre sensors

Marro Bellot, Cristian;Olivero, Massimo;Sangermano, Marco;Salvo, Milena
2018

Abstract

This paper reports on an epoxy matrix for glass fibre reinforced polymers equipped with low cost optical fibre sensors for the early detection of water diffusion, with devised applications in the oil and gas industry. Novel evanescent wave optical fibre sensors were designed, fabricated and embedded in epoxy resin samples. The tips of the optical fibre sensors were coated with a silver layer to work in reflection, so that they could be used as probes. Accelerated diffusion tests were performed: the samples were exposed to simulated sea water at 80 °C for up to 148 hours. The water diffusion resulted in a remarkable change of the reflected signal from the sensors, a result that was then confirmed through gravimetric measurements and a theoretical prediction, according to Fick’s diffusion law. The results corroborate the feasibility of “sensitive” fibre reinforced polymers in harsh environments and that chemicals diffusion in these materials can be remotely and continuously monitored by means of the presented sensing system.
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0142941818310067-main.pdf

accesso aperto

Descrizione: open access
Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Creative commons
Dimensione 1.33 MB
Formato Adobe PDF
1.33 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2713371
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo