This work investigated physic-chemical pre-treatments aimed at improving anaerobic digestion (AD) ofcosmetic industrial waste produced by a plant belonging to L’Oréal Group. A mixture designed according to relative abundances of waste was considered: sludge from internal wastewater treatment plant(54%-wt), residues of shampoo/conditioner (31%-wt), mascara sludge (13%-wt), food waste (2%-wt). Themixture had 80% VS/TS and COD equal to 1240 mg O2/gVS;soluble fraction of COD was 22%. Investigatedpre-treatments were: chemical, thermal, sonication and various combinations; their performances wereassessed through the disintegration rate (DR, the increment of soluble COD due to the pre-treatmentcompared to the unaltered sample). Best results were achieved from TA – thermo-alkaline (120 min at50◦C) with DR 64.4% and TAS – thermo-alkaline-sonication (15 min at 80◦C and 40 kHz) with DR 66.1%.The benefits of AD on pre-treated waste mixture were: 50% increase in methane yield (0.14 Nm3/kgVS)and 5–7%-wt reduction of waste amount. From technical, energy and economic viewpoints, the pro-posed technical solution can provide an interesting perspective, fully consistent with Circular Economy principles.

Pre-treatments aimed at increasing the biodegradability of cosmetic industrial waste / Demichelis, Francesca; Fiore, Silvia; Onofrio, Maurizio. - In: PROCESS SAFETY AND ENVIRONMENTAL PROTECTION. - ISSN 0957-5820. - STAMPA. - 118:(2018), pp. 245-253. [10.1016/j.psep.2018.07.001]

Pre-treatments aimed at increasing the biodegradability of cosmetic industrial waste

Demichelis, Francesca;Fiore, Silvia;Onofrio, Maurizio
2018

Abstract

This work investigated physic-chemical pre-treatments aimed at improving anaerobic digestion (AD) ofcosmetic industrial waste produced by a plant belonging to L’Oréal Group. A mixture designed according to relative abundances of waste was considered: sludge from internal wastewater treatment plant(54%-wt), residues of shampoo/conditioner (31%-wt), mascara sludge (13%-wt), food waste (2%-wt). Themixture had 80% VS/TS and COD equal to 1240 mg O2/gVS;soluble fraction of COD was 22%. Investigatedpre-treatments were: chemical, thermal, sonication and various combinations; their performances wereassessed through the disintegration rate (DR, the increment of soluble COD due to the pre-treatmentcompared to the unaltered sample). Best results were achieved from TA – thermo-alkaline (120 min at50◦C) with DR 64.4% and TAS – thermo-alkaline-sonication (15 min at 80◦C and 40 kHz) with DR 66.1%.The benefits of AD on pre-treated waste mixture were: 50% increase in methane yield (0.14 Nm3/kgVS)and 5–7%-wt reduction of waste amount. From technical, energy and economic viewpoints, the pro-posed technical solution can provide an interesting perspective, fully consistent with Circular Economy principles.
File in questo prodotto:
File Dimensione Formato  
pre-print_PSEP_2018.pdf

Open Access dal 06/07/2020

Descrizione: pre print
Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Creative commons
Dimensione 594.76 kB
Formato Adobe PDF
594.76 kB Adobe PDF Visualizza/Apri
2018 Pre treatments 1-s2.0-S0957582018304282-main.pdf

non disponibili

Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 1.1 MB
Formato Adobe PDF
1.1 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2710822
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo