Archivio Istituzionale della RicercaAC magnetic flux density meters usually integrate a high pass filter with a very low cut-off frequency (1 Hz-30 Hz) aiming at reducing the effect of slow oscillations. This can distort the actual time domain behaviour of induction waveforms detectable close to industrial or medical devices, even causing artefact high amplitude oscillations. This paper proposes a procedure to identify the filter parameters that accurately reproduce its measured frequency behaviour and suggests an algorithm to correct, in time domain, the field meter recorded waveform.
Identification and correction of artefact in the measurement of pulsed magnetic fields / Crotti, Gabriella; Giaccone, Luca; Giordano, Domenico. - ELETTRONICO. - (2016), pp. 1-2. (Intervento presentato al convegno 2016 Conference on Precision Electromagnetic Measurements, CPEM 2016 tenutosi a Ottawa (Canada) nel 2016) [10.1109/CPEM.2016.7540792].
Identification and correction of artefact in the measurement of pulsed magnetic fields
Giaccone, Luca;
2016
Abstract
AC magnetic flux density meters usually integrate a high pass filter with a very low cut-off frequency (1 Hz-30 Hz) aiming at reducing the effect of slow oscillations. This can distort the actual time domain behaviour of induction waveforms detectable close to industrial or medical devices, even causing artefact high amplitude oscillations. This paper proposes a procedure to identify the filter parameters that accurately reproduce its measured frequency behaviour and suggests an algorithm to correct, in time domain, the field meter recorded waveform.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2692419
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo