In recent years, with the idea of creating efficient, safe, and low-cost DSSCs, the research moved the attention towards alternative solvent-based electrolytes. Above all, DSSCs with water-based electrolytes have been proposed as one of the possible solution providing reduced costs, non-flammability and environmental compatibility. Recently we demonstrated that stability issues can be properly addressed by choosing the appropriate dye. Moreover, the possibility of gelling the liquid solvent into a polymeric matrix can reduce the electrolyte leakage outside the device, increasing the long-term stability. In this contribution, the investigation on a series of iodine and cobalt-based 100% aqueous electrolytes is presented. Thanks to our previous experience and to a multivariate approach (Design of Experiment), the effects of the change in redox mediator concentrations and in photoanode preparation on DSSCs performances have been evaluated. Finally, the gelation of the best aqueous electrolytes with bio-derived polymers has been performed. Photovoltaic performances and stabilities will be discussed by comparing liquid and gel electrolytes. In lab-scale solar cells interesting photovoltaic performances superior to 4% were achieved.

Quasi-solid aqueous electrolytes based on bio-derived polymers / Galliano, S.; Bella, Federico; Falco, Marisa; Provera, G.; Barolo, C.; Giordano, F.; Boschloo, G.; Graetzel, M.; Hagfeldt, A.; Gerbaldi, Claudio; Viscardi, G.. - ELETTRONICO. - (2017), pp. A1.O3-A1.O3. (Intervento presentato al convegno International Conference on Hybrid and Organic Photovoltaics (HOPV 17) tenutosi a Lausanne (Switzerland) nel 21st-24th May 2017).

Quasi-solid aqueous electrolytes based on bio-derived polymers

BELLA, FEDERICO;FALCO, MARISA;GERBALDI, CLAUDIO;
2017

Abstract

In recent years, with the idea of creating efficient, safe, and low-cost DSSCs, the research moved the attention towards alternative solvent-based electrolytes. Above all, DSSCs with water-based electrolytes have been proposed as one of the possible solution providing reduced costs, non-flammability and environmental compatibility. Recently we demonstrated that stability issues can be properly addressed by choosing the appropriate dye. Moreover, the possibility of gelling the liquid solvent into a polymeric matrix can reduce the electrolyte leakage outside the device, increasing the long-term stability. In this contribution, the investigation on a series of iodine and cobalt-based 100% aqueous electrolytes is presented. Thanks to our previous experience and to a multivariate approach (Design of Experiment), the effects of the change in redox mediator concentrations and in photoanode preparation on DSSCs performances have been evaluated. Finally, the gelation of the best aqueous electrolytes with bio-derived polymers has been performed. Photovoltaic performances and stabilities will be discussed by comparing liquid and gel electrolytes. In lab-scale solar cells interesting photovoltaic performances superior to 4% were achieved.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2673207
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo