Vehicle dynamics estimation has been the subject of study for some years now. If on-board vehicle control systems can be provided with information such as side slip angle, lateral force etc. then stability of the vehicle can be improved. To estimate these dynamic variables different observers have been used e.g., sliding mode, fuzzy logic, neural networks etc. In this article the authors propose an extended Kalman lter to estimate vehicle side slip angle. Roll angle is estimated using vertical loads as input. First, a linear Kalman lter is used to lter out the vertical forces and estimate roll angle. This information is then used to estimate the vehicle side slip angle. To take into account the nonlinearities concerning lateral vehicle dynamics, Pacejka magic formula is used to model lateral forces. Estimated results are then compared with simulations, showing good accuracy.

Vehicle Side Slip and Roll Angle Estimation / Syed, UMAIR HUSSAIN; Vigliani, Alessandro. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - STAMPA. - 1:(2016), pp. 1-8. (Intervento presentato al convegno SAE 2016 Congress tenutosi a Detroit nel Maggio 2016) [10.4271/2016-01-1654].

Vehicle Side Slip and Roll Angle Estimation

SYED, UMAIR HUSSAIN;VIGLIANI, Alessandro
2016

Abstract

Vehicle dynamics estimation has been the subject of study for some years now. If on-board vehicle control systems can be provided with information such as side slip angle, lateral force etc. then stability of the vehicle can be improved. To estimate these dynamic variables different observers have been used e.g., sliding mode, fuzzy logic, neural networks etc. In this article the authors propose an extended Kalman lter to estimate vehicle side slip angle. Roll angle is estimated using vertical loads as input. First, a linear Kalman lter is used to lter out the vertical forces and estimate roll angle. This information is then used to estimate the vehicle side slip angle. To take into account the nonlinearities concerning lateral vehicle dynamics, Pacejka magic formula is used to model lateral forces. Estimated results are then compared with simulations, showing good accuracy.
2016
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2647450
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo