The four-terminal-pair (4TP) definition of impedance standards allows reaching ultimate accuracy in impedance metrology. In general, the 4TP definition requires dedicated circuitry to be included in the bridge network and the attainment of auxiliary bridge balances during the measurement. A careful choice of the network topology allows the bridge to be self-compensating: the 4TP definition is in large part achieved by the behavior of the network itself without any adjustment. The additional circuitry required for impedance definition can therefore be simpler, the balancing procedure becomes easier, and a more robust 4TP can be achieved. This paper analyzes a current comparator bridge network with a topology featuring self-compensation. A digitally assisted test bridge has been implemented; test measurements on ac resistance comparison in the 25–100-ohm range at kilohertz frequencies are reported.

Self-Compensating Networks for Four-Terminal-Pair Impedance Definition in Current Comparator Bridges / Callegaro, Luca; D'Elia, Vincenzo; Kucera, Jan; Ortolano, Massimo; Pourdanesh, Faranak; Trinchera, BRUNO OTTAVIO. - In: IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT. - ISSN 0018-9456. - 65:5(2016), pp. 1149-1155. [10.1109/TIM.2015.2490898]

Self-Compensating Networks for Four-Terminal-Pair Impedance Definition in Current Comparator Bridges

D'ELIA, VINCENZO;ORTOLANO, Massimo;POURDANESH, FARANAK;TRINCHERA, BRUNO OTTAVIO
2016

Abstract

The four-terminal-pair (4TP) definition of impedance standards allows reaching ultimate accuracy in impedance metrology. In general, the 4TP definition requires dedicated circuitry to be included in the bridge network and the attainment of auxiliary bridge balances during the measurement. A careful choice of the network topology allows the bridge to be self-compensating: the 4TP definition is in large part achieved by the behavior of the network itself without any adjustment. The additional circuitry required for impedance definition can therefore be simpler, the balancing procedure becomes easier, and a more robust 4TP can be achieved. This paper analyzes a current comparator bridge network with a topology featuring self-compensation. A digitally assisted test bridge has been implemented; test measurements on ac resistance comparison in the 25–100-ohm range at kilohertz frequencies are reported.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2645469
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo