Nowadays motor vehicle population increases rapidly, and it and this leads to serious energy and environmental problems. Hence, the environment and energy issues are becoming more and more important around the world. Many potential technologies have been presented and researched in universities, institutes and companies. Diesel engines are employed in Europe widely due to high thermal efficiency. The PCCI combustion concept has the potential of simultaneously reducing both NOx and particulate matter emissions under an optimized control, and it will decrease the emissions of diesel engines further. Hence, the combustion control is important in diesel engine. The present work describes the development of a fast control-oriented semi-empirical model that is capable of predicting NOx emissions in diesel engines under steady state and transient conditions. The model takes into account the maximum in-cylinder burned gas temperature of the main injection, the ambient gas-to-fuel ratio, the mass of injected fuel, the engine speed and the injection pressure. The evaluation of the temperature of the burned gas is based on a three-zone real-time diagnostic thermodynamic model that has recently been developed by the author. Two correlations have also been developed in the present study, in order to evaluate the maximum burned gas temperature during the main combustion phase (derived from the three-zone diagnostic model) on the basis of significant engine parameters. The model has been tuned and applied to two diesel engines that feature different injection systems of the indirect acting piezoelectric, direct acting piezoelectric and solenoid type, respectively, over a wide range of steady-state operating conditions. The model has also been validated in transient operation conditions, over the urban and extra-urban phases of the NEDC. It has been shown that the proposed approach is capable of improving the predictive capability of NOx emissions, compared to previous approaches, and is characterized by a very low computational effort, as it is based on a single-equation correlation. It is therefore suitable for real-time applications, and could also be integrated in the engine control unit for closed-loop or feed-forward control tasks.

A CONTROL-ORIENTED REAL-TIME SEMI-EMPIRICAL MODEL FOR THE PREDICTION OF NOX EMISSIONS IN DIESEL ENGINES / Fu, Lezhong. - (2016). [10.6092/polito/porto/2639751]

A CONTROL-ORIENTED REAL-TIME SEMI-EMPIRICAL MODEL FOR THE PREDICTION OF NOX EMISSIONS IN DIESEL ENGINES

FU, LEZHONG
2016

Abstract

Nowadays motor vehicle population increases rapidly, and it and this leads to serious energy and environmental problems. Hence, the environment and energy issues are becoming more and more important around the world. Many potential technologies have been presented and researched in universities, institutes and companies. Diesel engines are employed in Europe widely due to high thermal efficiency. The PCCI combustion concept has the potential of simultaneously reducing both NOx and particulate matter emissions under an optimized control, and it will decrease the emissions of diesel engines further. Hence, the combustion control is important in diesel engine. The present work describes the development of a fast control-oriented semi-empirical model that is capable of predicting NOx emissions in diesel engines under steady state and transient conditions. The model takes into account the maximum in-cylinder burned gas temperature of the main injection, the ambient gas-to-fuel ratio, the mass of injected fuel, the engine speed and the injection pressure. The evaluation of the temperature of the burned gas is based on a three-zone real-time diagnostic thermodynamic model that has recently been developed by the author. Two correlations have also been developed in the present study, in order to evaluate the maximum burned gas temperature during the main combustion phase (derived from the three-zone diagnostic model) on the basis of significant engine parameters. The model has been tuned and applied to two diesel engines that feature different injection systems of the indirect acting piezoelectric, direct acting piezoelectric and solenoid type, respectively, over a wide range of steady-state operating conditions. The model has also been validated in transient operation conditions, over the urban and extra-urban phases of the NEDC. It has been shown that the proposed approach is capable of improving the predictive capability of NOx emissions, compared to previous approaches, and is characterized by a very low computational effort, as it is based on a single-equation correlation. It is therefore suitable for real-time applications, and could also be integrated in the engine control unit for closed-loop or feed-forward control tasks.
2016
File in questo prodotto:
File Dimensione Formato  
Tesi dottorato Lezhong FU XXVIII ciclo_20160309.pdf

accesso aperto

Descrizione: Main article
Tipologia: Tesi di dottorato
Licenza: Creative commons
Dimensione 5.82 MB
Formato Adobe PDF
5.82 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2639751
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo