Reduced order models (ROMs) of turbine bladed disks (blisks) are essential to quickly yet accurately characterize vibration characteristics and effectively design for high cycle fatigue. Modeling blisks with contacting shrouds at adjacent blades is especially challenging due to friction damping and localized non-linearities at the contact interfaces which can lead to complex stick-slip behavior. While well-known techniques such as the harmonic balance method and Craig-Bampton component mode synthesis have generally been employed to generate ROMs in the past, they do not reduce degrees of freedom (DoFs) at the interfaces themselves. In this paper we propose a novel method to obtain a set of reduction basis functions for the contact interface DoFs as well as the remaining DoFs called adaptive microslip projection (AMP). The method is based on analyzing a set of linear systems with specifically chosen boundary conditions on the contact interface. Simulated responses of full order baseline models and the novel ROMs under various conditions are studied. Results obtained from the ROMs compare very favorably with the baseline model. The AMP procedure is also easily generalizable to other dynamic systems with Coulomb friction contacts.

Adaptive microslip projection (AMP) for reduction of frictional and contact non-linearities in shrouded blisks / Mitra, Mainak; Zucca, Stefano; Epureanu, Bogdan I.. - STAMPA. - 7B:(2015), p. V07BT32A032. (Intervento presentato al convegno ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, GT 2015 tenutosi a Montreal (Can) nel 2015) [10.1115/GT2015-43967].

Adaptive microslip projection (AMP) for reduction of frictional and contact non-linearities in shrouded blisks

ZUCCA, Stefano;
2015

Abstract

Reduced order models (ROMs) of turbine bladed disks (blisks) are essential to quickly yet accurately characterize vibration characteristics and effectively design for high cycle fatigue. Modeling blisks with contacting shrouds at adjacent blades is especially challenging due to friction damping and localized non-linearities at the contact interfaces which can lead to complex stick-slip behavior. While well-known techniques such as the harmonic balance method and Craig-Bampton component mode synthesis have generally been employed to generate ROMs in the past, they do not reduce degrees of freedom (DoFs) at the interfaces themselves. In this paper we propose a novel method to obtain a set of reduction basis functions for the contact interface DoFs as well as the remaining DoFs called adaptive microslip projection (AMP). The method is based on analyzing a set of linear systems with specifically chosen boundary conditions on the contact interface. Simulated responses of full order baseline models and the novel ROMs under various conditions are studied. Results obtained from the ROMs compare very favorably with the baseline model. The AMP procedure is also easily generalizable to other dynamic systems with Coulomb friction contacts.
2015
9780791856772
9780791856772
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2637924
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo