One of the possible applications of Dye-sensitized Solar Cells (DSSCs) is the biasing of lowpower portable devices. In this framework, the cells should be flexible and adaptable to complex shapes. For these kinds of applications, quasi-solid or solid electrolytes are preferred with respect to liquid ones. As a good alternative to conventional gels, we proposed polymer electrolyte membranes (PEMs), prepared through a green, low-cost and fast process of photoinitiated polymerization, which allows obtaining a fast transformation of a liquid monomer or oligomer into a solid membrane with tailored physico-chemical and mechanical properties. We present here several acrylic/methacrylic PEMs, whose correlations between the structure of the polymer network and the charge transport properties were detailed. One the most critical aspect in the development of flexible DSSCs lies in the fabrication of a nanostructured TiO2 film with good adhesion to the conductive substrate, high surface area, excellent dye loading capabilities and good transport properties for the electrons. The employment of mesoporous TiO2 nanoparticles, treated with low-temperature procedures has been recently explored, but it did not guarantee the desired results. A possible alternative way is based on the use of TiO2 nanotubes (NTs) grown by anodic oxidation. TiO2 NTs show a good adhesion to the starting substrate of growth and can provide performances competitive with those of TiO2 nanoparticles, showing higher electron transport thanks to the quasi-one dimensional arrangement and high surface area for dye anchoring. The as grown and thermally treated samples were deeply investigated in order to gain a whole understanding of their structural, physical and chemical properties. Here we report for the first time the combination of a methacrylic crosslinked PEMs (whose polymeric network has been deeply characterized by charge-transfer measurements and dynamo-mechanical analysis) and vertically oriented TiO2nanotubes grown by anodic oxidation of flexible Ti mesh in order to fabricate a flexible and transparent DSSC. The photovoltaic behavior was exhaustively investigated by electrical measurements and impedance spectroscopy. To the state-of-the-art, the appropriate selection and optimization of all the materials allowed us to obtain the most efficient quasi-solid flexible DSSC ever produced.

Towards flexible dye-sensitized solar cell combining vertically aligned TiO2 nanotube array and light-cured polymer network / Bella, Federico; Lamberti, Andrea; Sacco, Adriano; Bianco, Stefano; Chiodoni, Angelica; Pirri, Candido; Bongiovanni, Roberta Maria; Tresso, Elena Maria. - ELETTRONICO. - (2014), pp. P231-P231. (Intervento presentato al convegno 6th International Conference on Hybrid Inorganic-Organic Photovoltaics (HOPV14) tenutosi a Lausanne (Switzerland) nel 11-14 May 2014).

Towards flexible dye-sensitized solar cell combining vertically aligned TiO2 nanotube array and light-cured polymer network

BELLA, FEDERICO;LAMBERTI, ANDREA;SACCO, ADRIANO;BIANCO, STEFANO;CHIODONI, ANGELICA;PIRRI, Candido;BONGIOVANNI, Roberta Maria;TRESSO, Elena Maria
2014

Abstract

One of the possible applications of Dye-sensitized Solar Cells (DSSCs) is the biasing of lowpower portable devices. In this framework, the cells should be flexible and adaptable to complex shapes. For these kinds of applications, quasi-solid or solid electrolytes are preferred with respect to liquid ones. As a good alternative to conventional gels, we proposed polymer electrolyte membranes (PEMs), prepared through a green, low-cost and fast process of photoinitiated polymerization, which allows obtaining a fast transformation of a liquid monomer or oligomer into a solid membrane with tailored physico-chemical and mechanical properties. We present here several acrylic/methacrylic PEMs, whose correlations between the structure of the polymer network and the charge transport properties were detailed. One the most critical aspect in the development of flexible DSSCs lies in the fabrication of a nanostructured TiO2 film with good adhesion to the conductive substrate, high surface area, excellent dye loading capabilities and good transport properties for the electrons. The employment of mesoporous TiO2 nanoparticles, treated with low-temperature procedures has been recently explored, but it did not guarantee the desired results. A possible alternative way is based on the use of TiO2 nanotubes (NTs) grown by anodic oxidation. TiO2 NTs show a good adhesion to the starting substrate of growth and can provide performances competitive with those of TiO2 nanoparticles, showing higher electron transport thanks to the quasi-one dimensional arrangement and high surface area for dye anchoring. The as grown and thermally treated samples were deeply investigated in order to gain a whole understanding of their structural, physical and chemical properties. Here we report for the first time the combination of a methacrylic crosslinked PEMs (whose polymeric network has been deeply characterized by charge-transfer measurements and dynamo-mechanical analysis) and vertically oriented TiO2nanotubes grown by anodic oxidation of flexible Ti mesh in order to fabricate a flexible and transparent DSSC. The photovoltaic behavior was exhaustively investigated by electrical measurements and impedance spectroscopy. To the state-of-the-art, the appropriate selection and optimization of all the materials allowed us to obtain the most efficient quasi-solid flexible DSSC ever produced.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2543743
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo