A custom fabrication procedure for pump combiners matched to a wide variety of double-clad fibers used in high power fiber lasers has been developed. Both combiners with and without feedthrough can be fabricated with an improved repeatability thanks to a specific mechanical setup that simplifies placing the fibers in their proper location within the input bundle before the tapering and fusion processes. Extensive characterization results on 7-to-1 and on (6+1)-to-1 combiners are confirming the validity of the proposed approach.

Fabrication of Pump Combiners for High Power Fiber Lasers / Braglia, Andrea; Olivero, Massimo; Neri, A.; Perrone, Guido. - STAMPA. - 7914:(2011), pp. 79142-V1-79142-V6. (Intervento presentato al convegno SPIE Photonics West 2011 tenutosi a San Francisco (USA) nel January 22-27, 2011) [10.1117/12.876278].

Fabrication of Pump Combiners for High Power Fiber Lasers

BRAGLIA, ANDREA;OLIVERO, MASSIMO;PERRONE, Guido
2011

Abstract

A custom fabrication procedure for pump combiners matched to a wide variety of double-clad fibers used in high power fiber lasers has been developed. Both combiners with and without feedthrough can be fabricated with an improved repeatability thanks to a specific mechanical setup that simplifies placing the fibers in their proper location within the input bundle before the tapering and fusion processes. Extensive characterization results on 7-to-1 and on (6+1)-to-1 combiners are confirming the validity of the proposed approach.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2430989
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo