The work shows correct procedures needed in order to gather reliable data from measurement of displacements versus axial load in a laboratory mounting of the Ilizarov external fixator. The mechanism of settling after load cycling is investigated. Detension under load is a major problem of wires. By means of vibration frequency measurements, tests on single wire allow determination of reduction in wire tension due to transverse loading: it is found that, almost independently from the amount of clamp tightening, the tension reaches a lower limit related only to the transverse load and not related to pretension. It is shown that, for higher clamp tightening torques, wire detension must be attributed to permanent plastic deformation of the wires; moreover, it is shown that the unavoidable errors in the spacing of the tensioned wires lead to marked decrease of their stiffness under transverse load.

Mechanical performance of external fixators with wires for the treatment of bone fractures. Part II: Wire tension and slippage / Delprete, Cristiana; Gola, Muzio. - In: JOURNAL OF BIOMECHANICAL ENGINEERING. - ISSN 0148-0731. - 115:1(1993), pp. 37-42.

Mechanical performance of external fixators with wires for the treatment of bone fractures. Part II: Wire tension and slippage

DELPRETE, CRISTIANA;GOLA, Muzio
1993

Abstract

The work shows correct procedures needed in order to gather reliable data from measurement of displacements versus axial load in a laboratory mounting of the Ilizarov external fixator. The mechanism of settling after load cycling is investigated. Detension under load is a major problem of wires. By means of vibration frequency measurements, tests on single wire allow determination of reduction in wire tension due to transverse loading: it is found that, almost independently from the amount of clamp tightening, the tension reaches a lower limit related only to the transverse load and not related to pretension. It is shown that, for higher clamp tightening torques, wire detension must be attributed to permanent plastic deformation of the wires; moreover, it is shown that the unavoidable errors in the spacing of the tensioned wires lead to marked decrease of their stiffness under transverse load.
1993
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/1663607
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo