Archivio Istituzionale della RicercaBASSINI, EMILIO
BASSINI, EMILIO
Dipartimento Scienza Applicata e Tecnologia
034478
The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion
2024 Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition
2023 Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M
2023 Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela
Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization
2023 Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara
Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing
2023 Bakhshifarkoush, Hanieh; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Biamino, Sara
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy
2022 Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo
Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM)
2022 Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo
Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field
2022 Bassini, Emilio; Marchese, Giulio; Sivo, Antonio; Martelli, Pietro Antonio; Gullino, Alessio; Ugues, Daniele
Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application
2022 Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.
Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)
2022 Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.
Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure
2022 Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara
Perfluoropolyether-Based Micellar Aggregates Coatings for Corrosion Resistance Enhancement of Copper-Based Alloys
2022 Bassini, Emilio; Gobber, FEDERICO SIMONE; Fracchia, Elisa; Zenaro, Chiara; Boccaleri, Enrico
Powder spreading and spreadability in the additive manufacturing of metallic materials: a critical review
2022 Capozzi, Luigi C.; Sivo, Antonio; Bassini, Emilio
Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions
2021 Sausto, F.; Marchese, G.; Bassini, E.; Calandri, M.; Biamino, S.; Ugues, D.; Foletti, S.; Beretta, S.
Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic–Ferritic Steel
2021 Bassini, Emilio; Sivo, Antonio; Ugues, Daniele
Directed energy deposition of AISI 316L stainless steel powder: Effect of process parameters
2021 Aversa, A.; Marchese, G.; Bassini, E.
Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM)
2021 Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.
Microstructure and hardness evolution of solution annealed inconel 625/TiC composite processed by laser powder bed fusion
2021 Marchese, G.; Aversa, A.; Bassini, E.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion / Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 28:January–February 2024(2024), pp. 2466-2477. [10.1016/j.jmrt.2023.12.131] | 1-gen-2024 | Martelli, P. A.Bassini, E.Marchese, G.Ugues, D. + | JMRT-D-23-09825_R1.pdf; 1-s2.0-S2238785423031952-main.pdf |
| Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition / Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - 13:7(2023). [10.3390/met13071315] | 1-gen-2023 | Alessandra MartucciEmilio BassiniMariangela Lombardi | metals-13-01315-v2.pdf |
| Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M / Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:4(2023). [10.3390/met13040796] | 1-gen-2023 | Alessandra MartucciGiulio MarcheseEmilio BassiniMariangela Lombardi | metals-13-00796+(5)_compressed.pdf |
| Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization / Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - 13:4(2023), pp. 1-12. [10.3390/met13040772] | 1-gen-2023 | Kenevisi, Mohammad SalehGhibaudo, CristianBassini, EmilioUgues, DanieleMarchese, GiulioBiamino, Sara | metals-13-00772.pdf |
| Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing / Bakhshifarkoush, Hanieh; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 16:16(2023). [10.3390/ma16165510] | 1-gen-2023 | Hanieh BakhshiFarkoushGiulio MarcheseEmilio BassiniAlberta AversaSara Biamino | materials-16-05510-v2.pdf |
| Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Pietro Antonio MartelliAntonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues | metals-13-00210-v2(1)_compressed(1).pdf |
| Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |
| An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy / Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - ELETTRONICO. - 189:(2022), p. 111958. [10.1016/j.matchar.2022.111958] | 1-gen-2022 | Aversa, AlbertaBassini, EmilioManfredi, DiegoBiamino, SaraFino, Paolo + | 1-s2.0-S1044580322002406-main.pdf |
| Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM) / Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - 15:12(2022), p. 4067. [10.3390/ma15124067] | 1-gen-2022 | Carrozza, AlessandroMarchese, GiulioSaboori, AbdollahBassini, EmilioAversa, AlbertaBondioli, FedericaUgues, DanieleBiamino, SaraFino, Paolo | materials-15-04067 (2).pdf |
| Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field / Bassini, Emilio; Marchese, Giulio; Sivo, Antonio; Martelli, Pietro Antonio; Gullino, Alessio; Ugues, Daniele. - In: MATERIALS. - ISSN 1996-1944. - 15:21(2022), pp. 7482-7501. [10.3390/ma15217482] | 1-gen-2022 | Bassini, EmilioMarchese, GiulioSivo, AntonioMartelli, Pietro AntonioGullino, AlessioUgues, Daniele | materials-15-07482.pdf |
| Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application / Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 890:(2022), p. 161631. [10.1016/j.jallcom.2021.161631] | 1-gen-2022 | Bassini, E.Biamino, S.Ugues, D. + | pagination_JALCOM_161631.pdf; pdfresizer.com-pdf-resize.pdf |
| Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF) / Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - (2022), p. 164213. [10.1016/j.jallcom.2022.164213] | 1-gen-2022 | Bassini, E.Sivo, A.Martelli, P. A.Rajczak, E.Marchese, G.Calignano, FBiamino, S.Ugues, D. | pagination_JALCOM_164213.pdf; 1-s2.0-S0925838822006041-main.pdf |
| Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure / Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:11(2022), p. 1916. [10.3390/met12111916] | 1-gen-2022 | Marinucci, FabrizioMarchese, GiulioBassini, EmilioAversa, AlbertaFino, PaoloUgues, DanieleBiamino, Sara | metals-12-01916.pdf |
| Perfluoropolyether-Based Micellar Aggregates Coatings for Corrosion Resistance Enhancement of Copper-Based Alloys / Bassini, Emilio; Gobber, FEDERICO SIMONE; Fracchia, Elisa; Zenaro, Chiara; Boccaleri, Enrico. - In: ALLOYS. - ISSN 2674-063X. - 1:2(2022), pp. 196-211. [10.3390/alloys1020012] | 1-gen-2022 | Emilio BassiniFederico Simone GobberElisa FracchiaEnrico Boccaleri + | alloys-01-00012.pdf |
| Powder spreading and spreadability in the additive manufacturing of metallic materials: a critical review / Capozzi, Luigi C.; Sivo, Antonio; Bassini, Emilio. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - ELETTRONICO. - 308:(2022), p. 117706. [10.1016/j.jmatprotec.2022.117706] | 1-gen-2022 | Capozzi, Luigi C.Sivo, AntonioBassini, Emilio | PROTEC-D-22-00722_R2_compressed.pdf; 1-s2.0-S0924013622002187-main.pdf |
| Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions / Sausto, F.; Marchese, G.; Bassini, E.; Calandri, M.; Biamino, S.; Ugues, D.; Foletti, S.; Beretta, S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - 44:1(2021), pp. 271-292. [10.1111/ffe.13373] | 1-gen-2021 | Marchese G.Bassini E.Calandri M.Biamino S.Ugues D. + | ffe.13373(1)_compressed.pdf; pdf accettato.pdf |
| Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic–Ferritic Steel / Bassini, Emilio; Sivo, Antonio; Ugues, Daniele. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 14:21(2021), p. 6662. [10.3390/ma14216662] | 1-gen-2021 | Emilio BassiniAntonio SivoDaniele Ugues | materials-14-06662-v2.pdf; pdfresizer.com-pdf-resize.pdf |
| Directed energy deposition of AISI 316L stainless steel powder: Effect of process parameters / Aversa, A.; Marchese, G.; Bassini, E.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:(2021), p. 932. [10.3390/met11060932] | 1-gen-2021 | Aversa A.Marchese G.Bassini E. | 2021_Aversa_Directed Energy Deposition of AISI 316L Stainless Steel Powder_ Effect of Process Parameters.pdf |
| Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM) / Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - ELETTRONICO. - 113:2(2021), pp. 65-73. | 1-gen-2021 | Bassini E.Sivo A.Marchese G.Martelli P.Calignano F.Biamino S.Ugues D. | ugues.pdf |
| Microstructure and hardness evolution of solution annealed inconel 625/TiC composite processed by laser powder bed fusion / Marchese, G.; Aversa, A.; Bassini, E.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:6(2021), p. 929. [10.3390/met11060929] | 1-gen-2021 | Marchese G.Aversa A.Bassini E. | Microstructure and Hardness Evolution of Solution Annealed Inconel 625_TiC composite processed by LPBF.pdf |