GOBBER, FEDERICO SIMONE
GOBBER, FEDERICO SIMONE
Dipartimento Scienza Applicata e Tecnologia
031144
Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution: An electrochemical study
2024 Spotorno, Roberto; Fracchia, Elisa; Krancher, Christian; Krieg, Romina; Theiß, Ralf; Dültgen, Peter; Marco Pezzana, Francesco; Gobber, FEDERICO SIMONE; ACTIS GRANDE, Marco; Piccardo, Paolo
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys
2024 Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder
2023 Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M
Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting
2023 Ghibaudo, C; Maculotti, G; Gobber, F; Saboori, A; Galetto, M; Biamino, S; Ugues, D
Synthesis and Characterization of Nanostructured Oxide Layers on Ti-Nb-Zr-Ta and Ti-Nb-Zr-Fe Biomedical Alloys
2023 Strnad, G.; Jakab-Farkas, L.; Gobber, F. S.; Peter, I.
About Residual Stress State of Castings: The Case of HPDC Parts and Possible Advantages through Semi-Solid Processes
2022 Fracchia, Elisa; Gobber, FEDERICO SIMONE; Mus, Claudio; Kobayashi, Yuji; Rosso, Mario
Perfluoropolyether-Based Micellar Aggregates Coatings for Corrosion Resistance Enhancement of Copper-Based Alloys
2022 Bassini, Emilio; Gobber, FEDERICO SIMONE; Fracchia, Elisa; Zenaro, Chiara; Boccaleri, Enrico
The Local Squeeze Technology for Challenging Aluminium HPDC Automotive Components
2022 Fracchia, Elisa; Gobber, FEDERICO SIMONE; Mus, Claudio; Pirovano, Raul; Rosso, Mario
Characterization of AlSi10Mg-CP-Ti Metal/Metal Composite Materials Produced by Electro-Sinter-Forging
2021 Gobber, Federico Simone; Fracchia, Elisa; Fais, Alessandro; Peter, Ildiko; Grande, Marco Actis
Coated Metal Powders for Laser Powder Bed Fusion (L-PBF) Processing: A Review
2021 Bidulsky, R; Gobber, Fs; Bidulska, J; Ceroni, M; Kvackaj, T; Grande, Ma
Effect of alloying elements on the Sr modification of Al-Si cast alloys
2021 Fracchia, E.; Gobber, F. S.; Rosso, M.
Effetto di affinante e modificante sulla microstruttura delle leghe Al-Si da colata = Effect of refining and modification on the microstructure of Al-Si casting alloys
2021 Fracchia, Elisa; Rosso, Mario; Gobber, FEDERICO SIMONE
Innovative Densification Process of a Fe-Cr-C Powder Metallurgy Steel
2021 Gobber, Federico Simone; Bidulská, Jana; Fais, Alessandro; Bidulský, Róbert; Grande, Marco Actis
Residual stress analysis applied to HPDC alluminium components: a case study
2021 Fracchia, E.; Gobber, F. S.; Rosso, M.; Kobayashi, Y.; Mus, C.
Residual stress analysis applied to HPDC aluminium components: a case study
2021 Fracchia, E.; Gobber, F. S.; Rosso, M.; Kobayashi, Y.; Mus, C.
Wear and Corrosion Resistance of AlSi10Mg–CP–Ti Metal–Metal Composite Materials Produced by Electro-Sinter-Forging
2021 Gobber, Federico Simone; Fracchia, Elisa; Spotorno, Roberto; Fais, Alessandro; Manfredi, Diego
Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions
2020 Bidulský, Róbert; Bidulská, Jana; Gobber, Federico Simone; Kvačkaj, Tibor; Petroušek, Patrik; Actis-Grande, Marco; Weiss, Klaus-Peter; Manfredi, Diego
Characterization of microstructural and mechanical properties after cold rolling of an electro-sinter-forged Cu-Sn alloy
2020 Gobber, Fs; Bidulská, J; Fais, A; Franchini, F; Bidulský, R; Kvačkaj, T; ACTIS GRANDE, Marco
Design and Manufacturing of a Nd-Doped Phosphate Glass-Based Jewel
2020 Pugliese, Diego; Gobber, Federico Simone; Forno, Ilaria; Milanese, Daniel; Actis Grande, Marco
Effects of Casting-Additives on the Microstructure Evolution of Hypoeutectic Aluminium-Silicon Alloys
2020 Fracchia, Elisa; Gobber, FEDERICO SIMONE; Rosso, Mario
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution: An electrochemical study / Spotorno, Roberto; Fracchia, Elisa; Krancher, Christian; Krieg, Romina; Theiß, Ralf; Dültgen, Peter; Marco Pezzana, Francesco; Gobber, FEDERICO SIMONE; ACTIS GRANDE, Marco; Piccardo, Paolo. - In: MATERIALS AND CORROSION. - ISSN 1521-4176. - ELETTRONICO. - (2024), pp. 1-18. [10.1002/maco.202314227] | 1-gen-2024 | Elisa FracchiaFederico Simone GobberMarco Actis Grande + | Accepted_Version.pdf; Materials Corrosion - 2024 - Spotorno - Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution An.pdf |
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys / Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - 14:1(2024). [10.3390/met14010017] | 1-gen-2024 | Bhaskaranand BhattAlessandra MartucciEnrico VirgillitoFederico GobberFederica BondioliDiego ManfrediMariangela LombardiPaolo Fino | metals-14-00017.pdf |
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder / Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M. - In: MATERIALS RESEARCH EXPRESS. - ISSN 2053-1591. - 10:4(2023), pp. 1-18. [10.1088/2053-1591/acc82f] | 1-gen-2023 | A MartucciF GobberA AversaD ManfrediP FinoM Lombardi | Martucci_2023_Mater._Res._Express_10_046508.pdf |
Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting / Ghibaudo, C; Maculotti, G; Gobber, F; Saboori, A; Galetto, M; Biamino, S; Ugues, D. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - 126:3-4(2023), pp. 1159-1173. [10.1007/s00170-023-11153-2] | 1-gen-2023 | Ghibaudo, CMaculotti, GGobber, FSaboori, AGaletto, MBiamino, SUgues, D | 2023_Ghibaudo_JAMT_H13_porosity.pdf |
Synthesis and Characterization of Nanostructured Oxide Layers on Ti-Nb-Zr-Ta and Ti-Nb-Zr-Fe Biomedical Alloys / Strnad, G.; Jakab-Farkas, L.; Gobber, F. S.; Peter, I.. - In: JOURNAL OF FUNCTIONAL BIOMATERIALS. - ISSN 2079-4983. - 14:4(2023). [10.3390/jfb14040180] | 1-gen-2023 | Gobber F. S.Peter I. + | jfb-14-00180-v2.pdf |
About Residual Stress State of Castings: The Case of HPDC Parts and Possible Advantages through Semi-Solid Processes / Fracchia, Elisa; Gobber, FEDERICO SIMONE; Mus, Claudio; Kobayashi, Yuji; Rosso, Mario. - ELETTRONICO. - 327:(2022), pp. 272-278. (Intervento presentato al convegno Conference on Semi-Solid Processing of Alloys and Composites (S2P2021) tenutosi a Leoben, Austria nel 28-30 settembre 2021) [10.4028/www.scientific.net/SSP.327.272]. | 1-gen-2022 | Elisa FracchiaFederico Simone GobberMario Rosso + | SSP.327.272.pdf |
Perfluoropolyether-Based Micellar Aggregates Coatings for Corrosion Resistance Enhancement of Copper-Based Alloys / Bassini, Emilio; Gobber, FEDERICO SIMONE; Fracchia, Elisa; Zenaro, Chiara; Boccaleri, Enrico. - In: ALLOYS. - ISSN 2674-063X. - 1:2(2022), pp. 196-211. [10.3390/alloys1020012] | 1-gen-2022 | Emilio BassiniFederico Simone GobberElisa FracchiaEnrico Boccaleri + | alloys-01-00012.pdf |
The Local Squeeze Technology for Challenging Aluminium HPDC Automotive Components / Fracchia, Elisa; Gobber, FEDERICO SIMONE; Mus, Claudio; Pirovano, Raul; Rosso, Mario. - ELETTRONICO. - (2022), pp. 772-778. (Intervento presentato al convegno TMS 2022 Annual Meeting & Exhibition tenutosi a Anaheim, California, USA nel February 27–March 3, 2022) [10.1007/978-3-030-92529-1_102]. | 1-gen-2022 | Elisa FracchiaFederico Simone GobberMario Rosso + | The Local Squeeze Technology for Challenging Aluminium HPDC Automotive Components.pdf |
Characterization of AlSi10Mg-CP-Ti Metal/Metal Composite Materials Produced by Electro-Sinter-Forging / Gobber, Federico Simone; Fracchia, Elisa; Fais, Alessandro; Peter, Ildiko; Grande, Marco Actis. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:10(2021), p. 1645. [10.3390/met11101645] | 1-gen-2021 | Gobber, Federico SimoneFracchia, ElisaGrande, Marco Actis + | metals-11-01645.pdf |
Coated Metal Powders for Laser Powder Bed Fusion (L-PBF) Processing: A Review / Bidulsky, R; Gobber, Fs; Bidulska, J; Ceroni, M; Kvackaj, T; Grande, Ma. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:11(2021), p. 1831. [10.3390/met11111831] | 1-gen-2021 | Gobber, FSCeroni, MGrande, MA + | metals-11-01831-v2.pdf |
Effect of alloying elements on the Sr modification of Al-Si cast alloys / Fracchia, E.; Gobber, F. S.; Rosso, M.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:2(2021), pp. 1-19. [10.3390/met11020342] | 1-gen-2021 | Fracchia E.Gobber F. S.Rosso M. | Effect of Alloying Elements on the Sr Modification of Al-Si Cast Alloys.pdf |
Effetto di affinante e modificante sulla microstruttura delle leghe Al-Si da colata = Effect of refining and modification on the microstructure of Al-Si casting alloys / Fracchia, Elisa; Rosso, Mario; Gobber, FEDERICO SIMONE. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - ELETTRONICO. - 113:1(2021), pp. 13-21. | 1-gen-2021 | Elisa FracchiaMario RossoFederico Simone Gobber | Effetto di affinante e modificante sulla microstruttura delle leghe Al-Si da colata.pdf |
Innovative Densification Process of a Fe-Cr-C Powder Metallurgy Steel / Gobber, Federico Simone; Bidulská, Jana; Fais, Alessandro; Bidulský, Róbert; Grande, Marco Actis. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 11:4(2021), p. 665. [10.3390/met11040665] | 1-gen-2021 | Gobber, Federico SimoneGrande, Marco Actis + | metals-1172424 proofed v2.docx; pdfresizer.com-pdf-resize.pdf |
Residual stress analysis applied to HPDC alluminium components: a case study / Fracchia, E.; Gobber, F. S.; Rosso, M.; Kobayashi, Y.; Mus, C.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 113:11-12(2021), pp. 54-59. | 1-gen-2021 | Fracchia, E.Gobber, F. S.Rosso, M. + | Residual stress analysis applied to HPDC.pdf |
Residual stress analysis applied to HPDC aluminium components: a case study / Fracchia, E.; Gobber, F. S.; Rosso, M.; Kobayashi, Y.; Mus, C.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - ELETTRONICO. - 11-12:113(2021), pp. 54-59. | 1-gen-2021 | E. FracchiaF. S. GobberM. Rosso + | Articolo pubblicato.pdf |
Wear and Corrosion Resistance of AlSi10Mg–CP–Ti Metal–Metal Composite Materials Produced by Electro-Sinter-Forging / Gobber, Federico Simone; Fracchia, Elisa; Spotorno, Roberto; Fais, Alessandro; Manfredi, Diego. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 14:22(2021), p. 6761. [10.3390/ma14226761] | 1-gen-2021 | Gobber, Federico SimoneFracchia, ElisaManfredi, Diego + | materials-14-06761.pdf |
Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions / Bidulský, Róbert; Bidulská, Jana; Gobber, Federico Simone; Kvačkaj, Tibor; Petroušek, Patrik; Actis-Grande, Marco; Weiss, Klaus-Peter; Manfredi, Diego. - In: MATERIALS. - ISSN 1996-1944. - 13:15(2020), p. 3328. [10.3390/ma13153328] | 1-gen-2020 | Bidulský, RóbertGobber, Federico SimoneActis-Grande, MarcoManfredi, Diego + | materials-13-03328-v2.pdf |
Characterization of microstructural and mechanical properties after cold rolling of an electro-sinter-forged Cu-Sn alloy / Gobber, Fs; Bidulská, J; Fais, A; Franchini, F; Bidulský, R; Kvačkaj, T; ACTIS GRANDE, Marco. - In: ARCHIVES OF METALLURGY AND MATERIALS. - ISSN 1733-3490. - 2:(2020), pp. 787-792. [10.24425/amm.2020.132821] | 1-gen-2020 | FS GOBBERF FRANCHINIM ACTIS GRANDE + | 35.pdf |
Design and Manufacturing of a Nd-Doped Phosphate Glass-Based Jewel / Pugliese, Diego; Gobber, Federico Simone; Forno, Ilaria; Milanese, Daniel; Actis Grande, Marco. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 13:10(2020), p. 2321. [10.3390/ma13102321] | 1-gen-2020 | Pugliese, DiegoGobber, Federico SimoneForno, IlariaMilanese, DanielActis Grande, Marco | Versione Editore.pdf |
Effects of Casting-Additives on the Microstructure Evolution of Hypoeutectic Aluminium-Silicon Alloys / Fracchia, Elisa; Gobber, FEDERICO SIMONE; Rosso, Mario. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 10:5(2020). [10.3390/met10050618] | 1-gen-2020 | Elisa FracchiaFederico Simone GobberMario Rosso | metals-10-00618.pdf |