FRACHE, ALBERTO
FRACHE, ALBERTO
Dipartimento Scienza Applicata e Tecnologia
003656
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing
2024 Lorenzi, Eleonora; Arrigo, Rossella; Frache, Alberto
Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites
2024 Gnoffo, Chiara; Arrigo, Rossella; Sisani, Michele; Frache, Alberto
Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding: A Simulation Approach
2024 Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto
Identification of Plastics in Mixtures and Blends through Pyrolysis-Gas Chromatography/Mass Spectrometry
2024 Gnoffo, Chiara; Frache, Alberto
Plastic waste recycling in additive manufacturing: Recovery of polypropylene from WEEE for the production of 3D printing filaments
2024 Spirio, Andrea; Arrigo, Rossella; Frache, Alberto; Tuccinardi, Letizia; Tuffi, Riccardo
The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach
2024 Cravero, Fulvia; Cavallini, Nicola; Savorani, Francesco; Arrigo, Rossella; Frache, Alberto
Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability
2024 Bernagozzi, Giulia; Arrigo, Rossella; Ponzielli, Giuseppe; Frache, Alberto
Development of polypropylene-based composites through fused filament fabrication: The effect of carbon-based fillers
2023 Casamento, Francesco; Padovano, Elisa; Pappalardo, Stefano; Frache, Alberto; Badini, Claudio
Fully bio-based ternary polymer blends: structural characterization and mechanical behavior
2023 Arrigo, R.; D'Anna, A.; Frache, A.
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene
2023 Frache, A.; Arrigo, R.; Malucelli, G.; Camino, G.
Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes
2023 Bernagozzi, Giulia; Battegazzore, Daniele; Arrigo, Rossella; Frache, Alberto
Anaerobic digestion and aerobic composting of rigid biopolymers in bio-waste treatment: fate and effects on the final compost
2022 Bandini, Francesca; Taskin, Eren; Vaccari, Filippo; Soldano, Mariangela; Piccinini, Sergio; Frache, Alberto; Remelli, Sara; Menta, Cristina; Sandro Cocconcelli, Pier; Puglisi, Edoardo
Designing a 3D printable polypropylene-based material from after use recycled disposable masks
2022 Battegazzore, D.; Cravero, F.; Bernagozzi, G.; Frache, A.
Development of disposable filtering mask recycled materials: Impact of blending with recycled mixed polyolefin and their aging stability
2022 Battegazzore, Daniele; Cravero, Fulvia; Frache, Alberto
FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior
2022 Arrigo, Rossella; Frache, Alberto
Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers
2022 Matta, Samuele; Bartoli, Mattia; Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio
Improvement of Poly(lactic acid)-Poly(hydroxy butyrate) Blend Properties for Use in Food Packaging: Processing, Structure Relationships
2022 Patel, Mitul Kumar; Zaccone, Marta; De Brauwer, Laurens; Nair, Rakesh; Monti, Marco; Martinez-Nogues, Vanesa; Frache, Alberto; Oksman, Kristiina
Recycled PP for 3D Printing: Material and Processing Optimization through Design of Experiment
2022 Arrigo, R; Battegazzore, D; Bernagozzi, G; Cravero, F; Pedraza, Dnr; Frache, A
Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters
2022 D'Anna, A.; Arrigo, R.; Frache, A.
Designing 3D printable polypropylene: Material and process optimisation through rheology
2021 Bertolino, M.; Battegazzore, D.; Arrigo, R.; Frache, A.
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing / Lorenzi, Eleonora; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 16:(2024), pp. 1-15. [10.3390/polym16060858] | 1-gen-2024 | Lorenzi,EleonoraArrigo,RossellaFrache,Alberto | polymers-16-00858.pdf |
Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites / Gnoffo, Chiara; Arrigo, Rossella; Sisani, Michele; Frache, Alberto. - In: POLYMER COMPOSITES. - ISSN 0272-8397. - (2024), pp. 1-12. [10.1002/pc.28221] | 1-gen-2024 | Gnoffo, ChiaraArrigo, RossellaFrache, Alberto + | Elongational flow-induced microstructure evolutions in polypropylene-layered double hydroxides nanocomposites.pdf; PC-23-2957.R4_Proof_hi (1).pdf |
Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding: A Simulation Approach / Bernagozzi, Giulia; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 16:(2024). [10.3390/polym16010070] | 1-gen-2024 | Bernagozzi, GiuliaArrigo, RossellaFrache, Alberto | Evolution of the Microstructure of PP-LDHs Nanocomposites during Melt Compounding A Simulation Approach.pdf |
Identification of Plastics in Mixtures and Blends through Pyrolysis-Gas Chromatography/Mass Spectrometry / Gnoffo, Chiara; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 16:1(2024). [10.3390/polym16010071] | 1-gen-2024 | Gnoffo, ChiaraFrache, Alberto | Identification_of_Plastics_in_Mixtures_and_Blends_.pdf |
Plastic waste recycling in additive manufacturing: Recovery of polypropylene from WEEE for the production of 3D printing filaments / Spirio, Andrea; Arrigo, Rossella; Frache, Alberto; Tuccinardi, Letizia; Tuffi, Riccardo. - In: JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING. - ISSN 2213-3437. - 12:3(2024), pp. 1-11. [10.1016/j.jece.2024.112474] | 1-gen-2024 | Arrigo, RossellaFrache, Alberto + | Plastic waste recycling in additive manufacturing recovery of polypropylene from WEEE for the production of 3D printing filaments.pdf |
The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach / Cravero, Fulvia; Cavallini, Nicola; Savorani, Francesco; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - 16:7(2024). [10.3390/polym16070870] | 1-gen-2024 | Cravero, FulviaCavallini, NicolaSavorani, FrancescoArrigo, RossellaFrache, Alberto | The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends a Multivariate Approach.pdf |
Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability / Bernagozzi, Giulia; Arrigo, Rossella; Ponzielli, Giuseppe; Frache, Alberto. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - 223:(2024). [10.1016/j.polymdegradstab.2024.110714] | 1-gen-2024 | Bernagozzi, GiuliaArrigo, RossellaFrache, Alberto + | Towards effective recycling routes for polypropylene influence of a repair additive on flow characteristics and processability.pdf |
Development of polypropylene-based composites through fused filament fabrication: The effect of carbon-based fillers / Casamento, Francesco; Padovano, Elisa; Pappalardo, Stefano; Frache, Alberto; Badini, Claudio. - In: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING. - ISSN 1359-835X. - ELETTRONICO. - 164:(2023), p. 107308. [10.1016/j.compositesa.2022.107308] | 1-gen-2023 | Casamento, FrancescoPadovano, ElisaPappalardo, StefanoFrache, AlbertoBadini, Claudio | proof articolo composites a.pdf; paper casamento.docx; 1-s2.0-S1359835X22004894-main.pdf; paper+casamento.pdf |
Fully bio-based ternary polymer blends: structural characterization and mechanical behavior / Arrigo, R.; D'Anna, A.; Frache, A.. - In: MATERIALS TODAY SUSTAINABILITY. - ISSN 2589-2347. - 21:(2023), p. 100314. [10.1016/j.mtsust.2022.100314] | 1-gen-2023 | Arrigo R.D'Anna A.Frache A. | 1-s2.0-S2589234722002068-main.pdf; 1-s2.0-S2589234722002068-main.pdf |
Insights into the effect of different macromolecular architectures on the charring ability of polyethylene / Frache, A.; Arrigo, R.; Malucelli, G.; Camino, G.. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - 216:(2023). [10.1016/j.polymdegradstab.2023.110476] | 1-gen-2023 | Frache A.Arrigo R.Malucelli G.Camino G. | 1-s2.0-S0141391023002264-main.pdf; 1-s2.0-S0141391023002264-main.pdf |
Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes / Bernagozzi, Giulia; Battegazzore, Daniele; Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 15:10(2023). [10.3390/polym15102263] | 1-gen-2023 | Bernagozzi, GiuliaBattegazzore, DanieleArrigo, RossellaFrache, Alberto | Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes.pdf |
Anaerobic digestion and aerobic composting of rigid biopolymers in bio-waste treatment: fate and effects on the final compost / Bandini, Francesca; Taskin, Eren; Vaccari, Filippo; Soldano, Mariangela; Piccinini, Sergio; Frache, Alberto; Remelli, Sara; Menta, Cristina; Sandro Cocconcelli, Pier; Puglisi, Edoardo. - In: BIORESOURCE TECHNOLOGY. - ISSN 0960-8524. - 351:(2022), p. 126934. [10.1016/j.biortech.2022.126934] | 1-gen-2022 | Frache, Alberto + | 131_Bioresource Technology 351 (2022) 126934.pdf |
Designing a 3D printable polypropylene-based material from after use recycled disposable masks / Battegazzore, D.; Cravero, F.; Bernagozzi, G.; Frache, A.. - In: MATERIALS TODAY COMMUNICATIONS. - ISSN 2352-4928. - ELETTRONICO. - 32:(2022). [10.1016/j.mtcomm.2022.103997] | 1-gen-2022 | D. BattegazzoreF. CraveroG. BernagozziA. Frache | 1-s2.0-S2352492822008510-main.pdf; Manuscript_REV3clean.pdf |
Development of disposable filtering mask recycled materials: Impact of blending with recycled mixed polyolefin and their aging stability / Battegazzore, Daniele; Cravero, Fulvia; Frache, Alberto. - In: RESOURCES, CONSERVATION AND RECYCLING. - ISSN 0921-3449. - ELETTRONICO. - 177:(2022), p. 105974. [10.1016/j.resconrec.2021.105974] | 1-gen-2022 | Daniele BattegazzoreFulvia CraveroAlberto Frache | 1-s2.0-S0921344921005838-main.pdf; manuscriptRCR_revclean.pdf |
FDM Printability of PLA Based-Materials: The Key Role of the Rheological Behavior / Arrigo, Rossella; Frache, Alberto. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:9(2022), p. 1754. [10.3390/polym14091754] | 1-gen-2022 | Rossella ArrigoAlberto Frache | FDM Printability of PLA Based-Materials The Key Role of the Rheological Behavior.pdf |
Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers / Matta, Samuele; Bartoli, Mattia; Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio. - In: COMPOSITES. PART C, OPEN ACCESS. - ISSN 2666-6820. - ELETTRONICO. - 8:(2022), p. 100252. [10.1016/j.jcomc.2022.100252] | 1-gen-2022 | Samuele MattaMattia BartoliRossella ArrigoAlberto FracheGiulio Malucelli | Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers.pdf; pdfresizer.com-pdf-resize.pdf |
Improvement of Poly(lactic acid)-Poly(hydroxy butyrate) Blend Properties for Use in Food Packaging: Processing, Structure Relationships / Patel, Mitul Kumar; Zaccone, Marta; De Brauwer, Laurens; Nair, Rakesh; Monti, Marco; Martinez-Nogues, Vanesa; Frache, Alberto; Oksman, Kristiina. - In: POLYMERS. - ISSN 2073-4360. - 14:23(2022), p. 5104. [10.3390/polym14235104] | 1-gen-2022 | Zaccone, MartaFrache, Alberto + | 137_Polymers_2022_14_5104.pdf |
Recycled PP for 3D Printing: Material and Processing Optimization through Design of Experiment / Arrigo, R; Battegazzore, D; Bernagozzi, G; Cravero, F; Pedraza, Dnr; Frache, A. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 12:21(2022), p. 10840. [10.3390/app122110840] | 1-gen-2022 | Arrigo, RBattegazzore, DBernagozzi, GCravero, FFrache, A + | Recycled PP for 3D Printing Material and Processing Optimization through Design of Experiment.pdf |
Rheology, Morphology and Thermal Properties of a PLA/PHB/Clay Blend Nanocomposite: The Influence of Process Parameters / D'Anna, A.; Arrigo, R.; Frache, A.. - In: JOURNAL OF POLYMERS AND THE ENVIRONMENT. - ISSN 1566-2543. - ELETTRONICO. - 30:(2022), pp. 102-113. [10.1007/s10924-021-02186-3] | 1-gen-2022 | D'Anna A.Arrigo R.Frache A. | Rheology, morphology and thermal properties of a PLA-PHB-clay blend nanocomposite the influence of process parameters.pdf |
Designing 3D printable polypropylene: Material and process optimisation through rheology / Bertolino, M.; Battegazzore, D.; Arrigo, R.; Frache, A.. - In: ADDITIVE MANUFACTURING. - ISSN 2214-8604. - ELETTRONICO. - 40:(2021), p. 101944. [10.1016/j.addma.2021.101944] | 1-gen-2021 | Bertolino M.Battegazzore D.Arrigo R.Frache A. | 1-s2.0-S2214860421001093-main.pdf; Designing 3D printable polypropylene_material and process optimisation through rheology.pdf |